Add 22deeee4712568fc942c828a18cfc607a0428e1e43d7c5a1f7fece8382cac76d_1445_flowchart.svg

Signed-off-by: rfyiamcool <rfyiamcool@163.com>

.docker-compose_cfg/config.yaml

@@ -1,79 +0,0 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#---------------Infrastructure configuration---------------------#
-etcd:
-  etcdSchema: openim  #默认即可
-  etcdAddr: [ 127.0.0.1:2379 ] #单机部署时，默认即可
-  userName:
-  password:
-  secret: openIM123
-
-mysql:
-  dbMysqlDatabaseName: admin_chat # 数据库名字 默认即可
-
-# 默认管理员账号
-admin:
-  defaultAccount:
-    account: [ "admin1", "admin2" ]
-    defaultPassword: [ "password1", "password2" ]
-    openIMUserID: [ "openIM123456", "openIMAdmin" ]
-    faceURL: [ "", "" ]
-    nickname: [ "admin1", "admin2" ]
-    level: [ 1, 100 ]
-
-
-adminapi:
-  openImAdminApiPort: [ 10009 ] #管理后台api服务端口，默认即可，需要开放此端口或做nginx转发
-  listenIP: 0.0.0.0
-
-chatapi:
-  openImChatApiPort: [ 10008 ] #登录注册，默认即可，需要开放此端口或做nginx转发
-  listenIP: 0.0.0.0
-
-rpcport: # rpc服务端口 默认即可
-  openImAdminPort: [ 30200 ]
-  openImChatPort: [ 30300 ]
-
-
-rpcregistername: #rpc注册服务名，默认即可
-  openImChatName: Chat
-  openImAdminCMSName: Admin
-
-chat:
-  codeTTL: 300 #短信验证码有效时间(秒)
-  superVerificationCode: 666666 # 超级验证码
-  alismsverify: #阿里云短信配置，在阿里云申请成功后修改以下四项
-    accessKeyId:
-    accessKeySecret:
-    signName:
-    verificationCodeTemplateCode:
-
-
-oss:
-  tempDir: enterprise-temp # 临时密钥上传的目录
-  dataDir: enterprise-data # 最终存放目录
-  aliyun:
-    endpoint: https://oss-cn-chengdu.aliyuncs.com
-    accessKeyID: ""
-    accessKeySecret: ""
-    bucket: ""
-  tencent:
-    BucketURL: ""
-    serviceURL: https://cos.COS_REGION.myqcloud.com
-    secretID: ""
-    secretKey: ""
-    sessionToken: ""
-    bucket: ""
-  use: "minio"

.docker-compose_cfg/datasource-compose.yaml

@@ -1,27 +0,0 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#more datasource-compose.yaml 
-apiVersion: 1
-
-datasources:
-- name: Prometheus
-  type: prometheus
-  access: proxy
-  orgId: 1
-  url: http://127.0.0.1:9091
-  basicAuth: false
-  isDefault: true
-  version: 1
-  editable: true

.docker-compose_cfg/prometheus-compose.yml

@@ -1,85 +0,0 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#more prometheus-compose.yml 
-global:
-  scrape_interval:     15s 
-  evaluation_interval: 15s 
-  external_labels:
-    monitor: 'openIM-monitor'
-
-scrape_configs:
-    - job_name: 'prometheus'
-      static_configs:
-      - targets: ['localhost:9091']
-
-    - job_name: 'openIM-server'
-      metrics_path: /metrics
-      static_configs:
-      - targets: ['localhost:10002']
-        labels:
-          group: 'api'
-
-      - targets: ['localhost:20110']
-        labels:
-          group: 'user'
-
-      - targets: ['localhost:20120']
-        labels:
-          group: 'friend'
-
-      - targets: ['localhost:20130']
-        labels:
-          group: 'message'
-
-      - targets: ['localhost:20140']
-        labels:
-          group: 'msg-gateway'    
-
-      - targets: ['localhost:20150']
-        labels:
-          group: 'group'
-
-      - targets: ['localhost:20160']
-        labels:
-          group: 'auth'
-
-      - targets: ['localhost:20170']
-        labels:
-          group: 'push'
-
-      - targets: ['localhost:20120']
-        labels:
-          group: 'friend'
-
-      
-      - targets: ['localhost:20230']
-        labels:
-          group: 'conversation' 
-
-      
-      - targets: ['localhost:21400', 'localhost:21401', 'localhost:21402', 'localhost:21403']
-        labels:
-          group: 'msg-transfer'
-       
- 
-
-
-      
-
-    - job_name: 'node'  
-      scrape_interval: 8s
-      static_configs:
-      - targets: ['localhost:9100']
-     

.env

@@ -29,8 +29,8 @@ PASSWORD=openIM123
 MINIO_ENDPOINT=http://172.28.0.1:10005
 
 # Base URL for the application programming interface (API).
-# Default: API_URL=http://172.0.0.1:10002
+# Default: API_URL=http://172.28.0.1:10002
-API_URL=http://172.0.0.1:10002
+API_URL=http://172.28.0.1:10002
 
 # Directory path for storing data files or related information.
 # Default: DATA_DIR=./
@@ -98,7 +98,14 @@ PROMETHEUS_NETWORK_ADDRESS=172.28.0.11
 # Address or hostname for the Grafana network.
 # Default: GRAFANA_NETWORK_ADDRESS=172.28.0.12
 GRAFANA_NETWORK_ADDRESS=172.28.0.12
-
+  
+# Address or hostname for the node_exporter network.
+# Default: NODE_EXPORTER_NETWORK_ADDRESS=172.28.0.13
+NODE_EXPORTER_NETWORK_ADDRESS=172.28.0.13
+  
+# Address or hostname for the OpenIM admin network.
+# Default: OPENIM_ADMIN_NETWORK_ADDRESS=172.28.0.14
+OPENIM_ADMIN_FRONT_NETWORK_ADDRESS=172.28.0.14
 
 # ===============================================
 # = Component Extension Configuration =
@@ -283,3 +290,19 @@ SERVER_BRANCH=main
 # Port for the OpenIM admin API.
 # Default: OPENIM_ADMIN_API_PORT=10009
 OPENIM_ADMIN_API_PORT=10009
+  
+# Port for the node exporter.
+# Default: NODE_EXPORTER_PORT=19100
+NODE_EXPORTER_PORT=19100
+  
+# Port for the prometheus.
+# Default: PROMETHEUS_PORT=19090
+PROMETHEUS_PORT=19090
+  
+# Port for the grafana.
+# Default: GRAFANA_PORT=3000
+GRAFANA_PORT=3000
+  
+# Port for the admin front.
+# Default: OPENIM_ADMIN_FRONT_PORT=11002
+OPENIM_ADMIN_FRONT_PORT=11002

.github/workflows/api-test.yml

@@ -1,90 +0,0 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-name: OpenIM API TEST
-
-on: 
-  push:
-    branches:
-        - main
-    paths-ignore:
-        - "docs/**"
-        - "README.md"
-        - "README_zh-CN.md"
-        - "CONTRIBUTING.md"
-  pull_request:
-    branches:
-        - main
-    paths-ignore:
-        - "README.md"
-        - "README_zh-CN.md"
-        - "CONTRIBUTING.md"
-        - "docs/**"
-
-env:
-  GO_VERSION: "1.19"
-  GOLANGCI_VERSION: "v1.50.1"
-
-jobs:
-  execute-linux-systemd-scripts:
-    name: Execute OpenIM script on ${{ matrix.os }}
-    runs-on: ${{ matrix.os }}
-    environment:
-      name: openim
-    strategy:
-      matrix:
-        go_version: ["1.20"]
-        os: ["ubuntu-latest"]
-    steps:
-    - name: Checkout code
-      uses: actions/checkout@v4
-
-    - name: Set up Go ${{ matrix.go_version }}
-      uses: actions/setup-go@v4
-      with:
-        go-version: ${{ matrix.go_version }}
-      id: go
-
-    - name: Install Task
-      uses: arduino/setup-task@v1
-      with:
-        version: '3.x' # If available, use the latest major version that's compatible
-        repo-token: ${{ secrets.GITHUB_TOKEN }}
-
-    - name: Docker Operations
-      run: |
-        curl -o docker-compose.yml https://raw.githubusercontent.com/OpenIMSDK/openim-docker/main/example/basic-openim-server-dependency.yml
-        sudo docker compose up -d
-        sudo sleep 60
-
-    - name: Module Operations
-      run: |
-        sudo make tidy
-        sudo make tools.verify.go-gitlint
-
-    - name: Build, Start, Check Services and Print Logs
-      run: |
-        sudo ./scripts/install/install.sh -i && \
-        sudo ./scripts/install/install.sh -s && \
-        (echo "An error occurred, printing logs:" && sudo cat ./_output/logs/* 2>/dev/null)
-
-    - name: Run Test
-      run: |
-        sudo make test-api && \
-        (echo "An error occurred, printing logs:" && sudo cat ./_output/logs/* 2>/dev/null)
-
-    - name: Stop Services
-      run: |
-        sudo ./scripts/install/install.sh -u && \
-        (echo "An error occurred, printing logs:" && sudo cat ./_output/logs/* 2>/dev/null)

.github/workflows/build-docker-image.yml

@@ -52,6 +52,7 @@ jobs:
             type=ref,event=branch
             type=ref,event=pr
             type=semver,pattern={{version}}
+            type=semver,pattern=v{{version}}
             type=semver,pattern={{major}}.{{minor}}
             type=semver,pattern={{major}}
             type=sha
@@ -87,6 +88,16 @@ jobs:
         uses: docker/metadata-action@v5.0.0
         with:
           images: registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-server
+          # generate Docker tags based on the following events/attributes
+          tags: |
+            type=schedule
+            type=ref,event=branch
+            type=ref,event=pr
+            type=semver,pattern={{version}}
+            type=semver,pattern=v{{version}}
+            type=semver,pattern={{major}}.{{minor}}
+            type=semver,pattern={{major}}
+            type=sha
 
       - name: Log in to AliYun Docker Hub
         uses: docker/login-action@v3
@@ -126,6 +137,7 @@ jobs:
             type=ref,event=branch
             type=ref,event=pr
             type=semver,pattern={{version}}
+            type=semver,pattern=v{{version}}
             type=semver,pattern={{major}}.{{minor}}
             type=semver,pattern={{major}}
             type=sha

.github/workflows/build-openim-web-image.yml

@@ -15,11 +15,11 @@
 name: Build OpenIM Web Docker image
 
 on:
-  schedule:
+#   schedule:
-  - cron: '30 3 * * *'
+#   - cron: '30 3 * * *'
   push:
     branches:
-      - main
+    #   - main
       - release-*
     tags:
       - v*

.github/workflows/e2e-test.yml

@@ -97,4 +97,15 @@ jobs:
 
     - name: Exec OpenIM System uninstall
       run: |
-        sudo ./scripts/install/install.sh -u
+        sudo ./scripts/install/install.sh -u
+
+    - name: gobenchdata publish
+      uses: bobheadxi/gobenchdata@v1
+      with:
+        PRUNE_COUNT: 30
+        GO_TEST_FLAGS: -cpu 1,2
+        PUBLISH: true
+        PUBLISH_BRANCH: gh-pages
+      env:
+        GITHUB_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}
+      continue-on-error: true

.github/workflows/link-pr.yml

@@ -41,7 +41,7 @@ jobs:
             # ./*.md all markdown files in the root directory
           args: --verbose  -E -i --no-progress --exclude-path './CHANGELOG' './**/*.md'
         env:
-          GITHUB_TOKEN: ${{secrets.GH_PAT}}
+          GITHUB_TOKEN: ${{secrets.BOT_GITHUB_TOKEN}}
 
       - name: Create Issue From File
         if: env.lychee_exit_code != 0

22deeee4712568fc942c828a18cfc607a0428e1e43d7c5a1f7fece8382cac76d_1445_flowchart.svg

@@ -0,0 +1,43 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.1//EN"
+ "http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd">
+<!-- Generated by graphviz version 2.43.0 (0)
+ -->
+<!-- Title: %3 Pages: 1 -->
+<svg width="447pt" height="165pt"
+ viewBox="0.00 0.00 447.00 164.74" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink">
+<g id="graph0" class="graph" transform="scale(1 1) rotate(0) translate(36 128.74)">
+<title>%3</title>
+<polygon fill="dimgray" stroke="transparent" points="-36,36 -36,-128.74 411,-128.74 411,36 -36,36"/>
+<text text-anchor="middle" x="187.5" y="-77.54" font-family="Helvetica,sans-Serif" font-size="14.00">Sweep&#39;s Plan &amp; Progress</text>
+<!-- start -->
+<g id="node1" class="node">
+<title>start</title>
+</g>
+<!-- e9278104&#45;5ca8&#45;4ff3&#45;9348&#45;96db9869a52a -->
+<g id="node3" class="node">
+<title>e9278104&#45;5ca8&#45;4ff3&#45;9348&#45;96db9869a52a</title>
+<ellipse fill="#ee0000" stroke="black" cx="184.5" cy="-26.87" rx="132.46" ry="26.74"/>
+<text text-anchor="middle" x="184.5" y="-30.67" font-family="Helvetica,sans-Serif" font-size="14.00">✗ Modify</text>
+<text text-anchor="middle" x="184.5" y="-15.67" font-family="Helvetica,sans-Serif" font-size="14.00">internal/rpc/user/user.go</text>
+</g>
+<!-- start&#45;&gt;e9278104&#45;5ca8&#45;4ff3&#45;9348&#45;96db9869a52a -->
+<g id="edge1" class="edge">
+<title>start&#45;&gt;e9278104&#45;5ca8&#45;4ff3&#45;9348&#45;96db9869a52a</title>
+<path fill="none" stroke="black" d="M1.03,-26.87C4.1,-26.87 20.28,-26.87 41.85,-26.87"/>
+<polygon fill="black" stroke="black" points="42.12,-30.37 52.12,-26.87 42.12,-23.37 42.12,-30.37"/>
+<text text-anchor="middle" x="26.64" y="-33.67" font-family="Helvetica,sans-Serif" font-size="14.00">Start</text>
+</g>
+<!-- end -->
+<g id="node2" class="node">
+<title>end</title>
+</g>
+<!-- e9278104&#45;5ca8&#45;4ff3&#45;9348&#45;96db9869a52a&#45;&gt;end -->
+<g id="edge2" class="edge">
+<title>e9278104&#45;5ca8&#45;4ff3&#45;9348&#45;96db9869a52a&#45;&gt;end</title>
+<path fill="none" stroke="black" d="M316.98,-26.87C336.34,-26.87 353.23,-26.87 363.61,-26.87"/>
+<polygon fill="black" stroke="black" points="363.85,-30.37 373.85,-26.87 363.85,-23.37 363.85,-30.37"/>
+<text text-anchor="middle" x="345.36" y="-33.67" font-family="Helvetica,sans-Serif" font-size="14.00">Finish</text>
+</g>
+</g>
+</svg>

README-zh_CN.md

@@ -30,7 +30,7 @@
 </p>
 
 ## 🟢 扫描微信进群交流
-<img src="https://openim-1253691595.cos.ap-nanjing.myqcloud.com/WechatIMG20.jpeg" width="300">
+<img src="./docs/images/Wechat.jpg" width="300">
 
 
 ## Ⓜ️ 关于 OpenIM

README.md

@@ -231,7 +231,7 @@ Before you start, please make sure your changes are in demand. The best for that
 - [OpenIM Makefile Utilities](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/util-makefile.md)
 - [OpenIM Script Utilities](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/util-scripts.md)
 - [OpenIM Versioning](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/version.md)
-
+- [Manage backend and monitor deployment](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/prometheus-grafana.md)
 
 ## :busts_in_silhouette: Community
 

cbd0785fc0f19918842878a6af340aa05bc834d0348d0ee15418e34bcc3a7b80_1445_flowchart.svg

@@ -0,0 +1,43 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.1//EN"
+ "http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd">
+<!-- Generated by graphviz version 2.43.0 (0)
+ -->
+<!-- Title: %3 Pages: 1 -->
+<svg width="447pt" height="165pt"
+ viewBox="0.00 0.00 447.00 164.74" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink">
+<g id="graph0" class="graph" transform="scale(1 1) rotate(0) translate(36 128.74)">
+<title>%3</title>
+<polygon fill="dimgray" stroke="transparent" points="-36,36 -36,-128.74 411,-128.74 411,36 -36,36"/>
+<text text-anchor="middle" x="187.5" y="-77.54" font-family="Helvetica,sans-Serif" font-size="14.00">Sweep&#39;s Plan &amp; Progress</text>
+<!-- start -->
+<g id="node1" class="node">
+<title>start</title>
+</g>
+<!-- e9278104&#45;5ca8&#45;4ff3&#45;9348&#45;96db9869a52a -->
+<g id="node3" class="node">
+<title>e9278104&#45;5ca8&#45;4ff3&#45;9348&#45;96db9869a52a</title>
+<ellipse fill="yellow" stroke="black" cx="184.5" cy="-26.87" rx="132.46" ry="26.74"/>
+<text text-anchor="middle" x="184.5" y="-30.67" font-family="Helvetica,sans-Serif" font-size="14.00">⋯ Modify</text>
+<text text-anchor="middle" x="184.5" y="-15.67" font-family="Helvetica,sans-Serif" font-size="14.00">internal/rpc/user/user.go</text>
+</g>
+<!-- start&#45;&gt;e9278104&#45;5ca8&#45;4ff3&#45;9348&#45;96db9869a52a -->
+<g id="edge1" class="edge">
+<title>start&#45;&gt;e9278104&#45;5ca8&#45;4ff3&#45;9348&#45;96db9869a52a</title>
+<path fill="none" stroke="black" d="M1.03,-26.87C4.1,-26.87 20.28,-26.87 41.85,-26.87"/>
+<polygon fill="black" stroke="black" points="42.12,-30.37 52.12,-26.87 42.12,-23.37 42.12,-30.37"/>
+<text text-anchor="middle" x="26.64" y="-33.67" font-family="Helvetica,sans-Serif" font-size="14.00">Start</text>
+</g>
+<!-- end -->
+<g id="node2" class="node">
+<title>end</title>
+</g>
+<!-- e9278104&#45;5ca8&#45;4ff3&#45;9348&#45;96db9869a52a&#45;&gt;end -->
+<g id="edge2" class="edge">
+<title>e9278104&#45;5ca8&#45;4ff3&#45;9348&#45;96db9869a52a&#45;&gt;end</title>
+<path fill="none" stroke="black" d="M316.98,-26.87C336.34,-26.87 353.23,-26.87 363.61,-26.87"/>
+<polygon fill="black" stroke="black" points="363.85,-30.37 373.85,-26.87 363.85,-23.37 363.85,-30.37"/>
+<text text-anchor="middle" x="345.36" y="-33.67" font-family="Helvetica,sans-Serif" font-size="14.00">Finish</text>
+</g>
+</g>
+</svg>

config/alertmanager.yml

@@ -0,0 +1,32 @@
+###################### AlertManager Configuration ######################
+# AlertManager configuration using environment variables
+#
+# Resolve timeout
+# SMTP configuration for sending alerts
+# Templates for email notifications
+# Routing configurations for alerts
+# Receiver configurations
+global:
+  resolve_timeout: 5m
+  smtp_from: alert@openim.io
+  smtp_smarthost: smtp.163.com:465
+  smtp_auth_username: alert@openim.io
+  smtp_auth_password: YOURAUTHPASSWORD
+  smtp_require_tls: false
+  smtp_hello: xxx监控告警
+
+templates:
+  - /etc/alertmanager/email.tmpl
+
+route:
+  group_wait: 5s
+  group_interval: 5s
+  repeat_interval: 5m
+  receiver: email
+receivers:
+  - name: email
+    email_configs:
+      - to: {EMAIL_TO:-'alert@example.com'}
+        html: '{{ template "email.to.html" . }}'
+        headers: { Subject: "[OPENIM-SERVER]Alarm" }
+        send_resolved: true

config/config.yaml

@@ -198,7 +198,7 @@ rpcRegisterName:
 # Whether to output in json format
 # Whether to include stack trace in logs
 log:
-  storageLocation: ./logs/
+  storageLocation: ../logs/
   rotationTime: 24
   remainRotationCount: 2
   remainLogLevel: 6
@@ -382,7 +382,7 @@ callback:
 # The number of Prometheus ports per service needs to correspond to rpcPort
 # The number of ports needs to be consistent with msg_transfer_service_num in script/path_info.sh
 prometheus:
-  enable: true
+  enable: false
   prometheusUrl: "https://openim.prometheus"
   apiPrometheusPort: [20100]
   userPrometheusPort: [ 20110 ]

config/email.tmpl

@@ -0,0 +1,16 @@
+{{ define "email.to.html" }}
+{{ range .Alerts }}
+<!-- Begin of OpenIM Alert -->
+<div style="border:1px solid #ccc; padding:10px; margin-bottom:10px;">
+    <h3>OpenIM Alert</h3>
+    <p><strong>Alert Program:</strong> Prometheus Alert</p>
+    <p><strong>Severity Level:</strong> {{ .Labels.severity }}</p>
+    <p><strong>Alert Type:</strong> {{ .Labels.alertname }}</p>
+    <p><strong>Affected Host:</strong> {{ .Labels.instance }}</p>
+    <p><strong>Affected Service:</strong> {{ .Labels.job }}</p>
+    <p><strong>Alert Subject:</strong> {{ .Annotations.summary }}</p>
+    <p><strong>Trigger Time:</strong> {{ .StartsAt.Format "2006-01-02 15:04:05" }}</p>
+</div>
+<!-- End of OpenIM Alert -->
+{{ end }}
+{{ end }}

config/instance-down-rules.yml

@@ -0,0 +1,11 @@
+groups:
+  - name: instance_down
+    rules:
+      - alert: InstanceDown
+        expr: up == 0
+        for: 1m
+        labels:
+          severity: critical
+        annotations:
+          summary: "Instance {{ $labels.instance }} down"
+          description: "{{ $labels.instance }} of job {{ $labels.job }} has been down for more than 1 minutes."

config/prometheus.yml

@@ -0,0 +1,85 @@
+# my global config
+global:
+  scrape_interval:     15s # Set the scrape interval to every 15 seconds. Default is every 1 minute.
+  evaluation_interval: 15s # Evaluate rules every 15 seconds. The default is every 1 minute.
+  # scrape_timeout is set to the global default (10s).
+
+# Alertmanager configuration
+alerting:
+  alertmanagers:
+    - static_configs:
+        - targets: ['172.28.0.1:19093']
+
+# Load rules once and periodically evaluate them according to the global 'evaluation_interval'.
+rule_files:
+  - "instance-down-rules.yml"
+# - "first_rules.yml"
+# - "second_rules.yml"
+
+# A scrape configuration containing exactly one endpoint to scrape:
+# Here it's Prometheus itself.
+scrape_configs:
+  # The job name is added as a label "job='job_name'"" to any timeseries scraped from this config.
+  # Monitored information captured by prometheus
+  - job_name: 'node-exporter'
+    static_configs:
+      - targets: [ '172.28.0.1:19100' ]
+        labels:
+          namespace: 'default'
+
+  # prometheus fetches application services
+  - job_name: 'openimserver-openim-api'
+    static_configs:
+      - targets: [ '172.28.0.1:20100' ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-msggateway'
+    static_configs:
+      - targets: [ '172.28.0.1:20140' ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-msgtransfer'
+    static_configs:
+      - targets: [ 172.28.0.1:21400, 172.28.0.1:21401, 172.28.0.1:21402, 172.28.0.1:21403 ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-push'
+    static_configs:
+      - targets: [ '172.28.0.1:20170' ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-rpc-auth'
+    static_configs:
+      - targets: [ '172.28.0.1:20160' ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-rpc-conversation'
+    static_configs:
+      - targets: [ '172.28.0.1:20230' ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-rpc-friend'
+    static_configs:
+      - targets: [ '172.28.0.1:20120' ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-rpc-group'
+    static_configs:
+      - targets: [ '172.28.0.1:20150' ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-rpc-msg'
+    static_configs:
+      - targets: [ '172.28.0.1:20130' ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-rpc-third'
+    static_configs:
+      - targets: [ '172.28.0.1:21301' ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-rpc-user'
+    static_configs:
+      - targets: [ '172.28.0.1:20110' ]
+        labels:
+          namespace: 'default'

deployments/README.md

@@ -123,6 +123,30 @@ Explore our Helm-Charts repository and read through: [Helm-Charts Repository](ht
 
 Using the helm charts repository, you can ignore the following configuration, but if you want to just use the server and scale on top of it, you can go ahead:
 
+**Use the Helm template to generate the deployment yaml file: `openim-charts.yaml`**
+
+**Gen Image:**
+
+```bash
+../scripts/genconfig.sh ../scripts/install/environment.sh ./templates/helm-image.yaml > ./charts/generated-configs/helm-image.yaml
+```
+
+**Gen Charts:**
+
+```bash
+for chart in ./charts/*/; do
+    if [[ "$chart" == *"generated-configs"* || "$chart" == *"helmfile.yaml"* ]]; then
+        continue
+    fi
+
+    if [ -f "${chart}values.yaml" ]; then
+        helm template "$chart" -f "./charts/generated-configs/helm-image.yaml" -f "./charts/generated-configs/config.yaml" -f "./charts/generated-configs/notification.yaml" >> openim-charts.yaml
+    else
+        helm template "$chart" >> openim-charts.yaml
+    fi
+done
+```
+
 **Use Helmfile:**
 
 ```bash

deployments/templates/alertmanager.yml

@@ -0,0 +1,33 @@
+###################### AlertManager Configuration ######################
+# AlertManager configuration using environment variables
+#
+# Resolve timeout
+# SMTP configuration for sending alerts
+# Templates for email notifications
+# Routing configurations for alerts
+# Receiver configurations
+global:
+  resolve_timeout: ${ALERTMANAGER_RESOLVE_TIMEOUT}
+  smtp_from: ${ALERTMANAGER_SMTP_FROM}
+  smtp_smarthost: ${ALERTMANAGER_SMTP_SMARTHOST}
+  smtp_auth_username: ${ALERTMANAGER_SMTP_AUTH_USERNAME}
+  smtp_auth_password: ${ALERTMANAGER_SMTP_AUTH_PASSWORD}
+  smtp_require_tls: ${ALERTMANAGER_SMTP_REQUIRE_TLS}
+  smtp_hello: ${ALERTMANAGER_SMTP_HELLO}
+
+templates:
+  - /etc/alertmanager/email.tmpl
+
+route:
+  group_by: ['alertname']
+  group_wait: 5s
+  group_interval: 5s
+  repeat_interval: 5m
+  receiver: email
+receivers:
+  - name: email
+    email_configs:
+      - to: ${ALERTMANAGER_EMAIL_TO}
+        html: '{{ template "email.to.html" . }}'
+        headers: { Subject: "[OPENIM-SERVER]Alarm" }
+        send_resolved: true

deployments/templates/chat.yaml

@@ -96,7 +96,14 @@ verifyCode:
     accessKeySecret: ""
     signName: ""
     verificationCodeTemplateCode: ""
-
+  mail: # 根据对应的发件邮箱更改 sendMail、senderAuthorizationCode、smtpAddr、smtpPort 即可
+    title: ""
+    senderMail: "" # 发送者
+    senderAuthorizationCode: "" # 授权码
+    smtpAddr: "smtp.qq.com"  # smtp 服务器地址
+    smtpPort: 25   # smtp 服务器邮件发送端口
+  testDepartMentID: 001
+  imAPIURL: http://127.0.0.1:10002
 
 ###################### Proxy Header ######################
 # 获取ip的header,没有配置直接获取远程地址

deployments/templates/env_template.yaml

@@ -94,12 +94,22 @@ OPENIM_CHAT_NETWORK_ADDRESS=${OPENIM_CHAT_NETWORK_ADDRESS}
 # Address or hostname for the Prometheus network.
 # Default: PROMETHEUS_NETWORK_ADDRESS=172.28.0.11
 PROMETHEUS_NETWORK_ADDRESS=${PROMETHEUS_NETWORK_ADDRESS}
-
+  
 # Address or hostname for the Grafana network.
 # Default: GRAFANA_NETWORK_ADDRESS=172.28.0.12
 GRAFANA_NETWORK_ADDRESS=${GRAFANA_NETWORK_ADDRESS}
-
+  
-
+# Address or hostname for the node_exporter network.
+# Default: NODE_EXPORTER_NETWORK_ADDRESS=172.28.0.13
+NODE_EXPORTER_NETWORK_ADDRESS=${NODE_EXPORTER_NETWORK_ADDRESS}
+  
+# Address or hostname for the OpenIM admin network.
+# Default: OPENIM_ADMIN_NETWORK_ADDRESS=172.28.0.14
+OPENIM_ADMIN_FRONT_NETWORK_ADDRESS=${OPENIM_ADMIN_FRONT_NETWORK_ADDRESS}
+  
+# Address or hostname for the alertmanager network.
+# Default: ALERT_MANAGER_NETWORK_ADDRESS=172.28.0.15
+ALERT_MANAGER_NETWORK_ADDRESS=${ALERT_MANAGER_NETWORK_ADDRESS}
 # ===============================================
 # = Component Extension Configuration =
 # ===============================================
@@ -215,7 +225,7 @@ PROMETHEUS_PORT=${PROMETHEUS_PORT}
 GRAFANA_ADDRESS=${GRAFANA_NETWORK_ADDRESS}
 
 # Port on which Grafana service is running.
-# Default: GRAFANA_PORT=3000
+# Default: GRAFANA_PORT=13000
 GRAFANA_PORT=${GRAFANA_PORT}
 
 # ======================================
@@ -283,3 +293,23 @@ SERVER_BRANCH=${SERVER_BRANCH}
 # Port for the OpenIM admin API.
 # Default: OPENIM_ADMIN_API_PORT=10009
 OPENIM_ADMIN_API_PORT=${OPENIM_ADMIN_API_PORT}
+  
+# Port for the node exporter.
+# Default: NODE_EXPORTER_PORT=19100
+NODE_EXPORTER_PORT=${NODE_EXPORTER_PORT}
+  
+# Port for the prometheus.
+# Default: PROMETHEUS_PORT=19090
+PROMETHEUS_PORT=${PROMETHEUS_PORT}
+  
+# Port for the grafana.
+# Default: GRAFANA_PORT=13000
+GRAFANA_PORT=${GRAFANA_PORT}
+  
+# Port for the admin front.
+# Default: OPENIM_ADMIN_FRONT_PORT=11002
+OPENIM_ADMIN_FRONT_PORT=${OPENIM_ADMIN_FRONT_PORT}
+
+# Port for the alertmanager.
+# Default: ALERT_MANAGER_PORT=19093
+ALERT_MANAGER_PORT=${ALERT_MANAGER_PORT}

deployments/templates/prometheus.yml

@@ -0,0 +1,85 @@
+# my global config
+global:
+  scrape_interval:     15s # Set the scrape interval to every 15 seconds. Default is every 1 minute.
+  evaluation_interval: 15s # Evaluate rules every 15 seconds. The default is every 1 minute.
+  # scrape_timeout is set to the global default (10s).
+
+# Alertmanager configuration
+alerting:
+  alertmanagers:
+    - static_configs:
+        - targets: ['${ALERT_MANAGER_ADDRESS}:${ALERT_MANAGER_PORT}']
+
+# Load rules once and periodically evaluate them according to the global 'evaluation_interval'.
+rule_files:
+  - "instance-down-rules.yml"
+# - "first_rules.yml"
+# - "second_rules.yml"
+
+# A scrape configuration containing exactly one endpoint to scrape:
+# Here it's Prometheus itself.
+scrape_configs:
+  # The job name is added as a label "job='job_name'"" to any timeseries scraped from this config.
+  # Monitored information captured by prometheus
+  - job_name: 'node-exporter'
+    static_configs:
+      - targets: [ '${NODE_EXPORTER_ADDRESS}:${NODE_EXPORTER_PORT}' ]
+        labels:
+          namespace: 'default'
+
+  # prometheus fetches application services
+  - job_name: 'openimserver-openim-api'
+    static_configs:
+      - targets: [ '${OPENIM_SERVER_ADDRESS}:${API_PROM_PORT}' ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-msggateway'
+    static_configs:
+      - targets: [ '${OPENIM_SERVER_ADDRESS}:${MSG_GATEWAY_PROM_PORT}' ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-msgtransfer'
+    static_configs:
+      - targets: [ ${MSG_TRANSFER_PROM_ADDRESS_PORT} ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-push'
+    static_configs:
+      - targets: [ '${OPENIM_SERVER_ADDRESS}:${PUSH_PROM_PORT}' ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-rpc-auth'
+    static_configs:
+      - targets: [ '${OPENIM_SERVER_ADDRESS}:${AUTH_PROM_PORT}' ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-rpc-conversation'
+    static_configs:
+      - targets: [ '${OPENIM_SERVER_ADDRESS}:${CONVERSATION_PROM_PORT}' ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-rpc-friend'
+    static_configs:
+      - targets: [ '${OPENIM_SERVER_ADDRESS}:${FRIEND_PROM_PORT}' ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-rpc-group'
+    static_configs:
+      - targets: [ '${OPENIM_SERVER_ADDRESS}:${GROUP_PROM_PORT}' ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-rpc-msg'
+    static_configs:
+      - targets: [ '${OPENIM_SERVER_ADDRESS}:${MESSAGE_PROM_PORT}' ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-rpc-third'
+    static_configs:
+      - targets: [ '${OPENIM_SERVER_ADDRESS}:${THIRD_PROM_PORT}' ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-rpc-user'
+    static_configs:
+      - targets: [ '${OPENIM_SERVER_ADDRESS}:${USER_PROM_PORT}' ]
+        labels:
+          namespace: 'default'

docker-compose.yml

@@ -67,17 +67,17 @@ services:
         ipv4_address: ${REDIS_NETWORK_ADDRESS}
 
   zookeeper:
-   image: bitnami/zookeeper:3.8
+    image: bitnami/zookeeper:3.8
-   container_name: zookeeper
+    container_name: zookeeper
-   ports:
+    ports:
-    - "${ZOOKEEPER_PORT}:2181"
+     - "${ZOOKEEPER_PORT}:2181"
-   volumes:
+    volumes:
-     - "/etc/localtime:/etc/localtime"
+      - "/etc/localtime:/etc/localtime"
-   environment:
+    environment:
-     - ALLOW_ANONYMOUS_LOGIN=yes
+      - ALLOW_ANONYMOUS_LOGIN=yes
-     - TZ="Asia/Shanghai"
+      - TZ="Asia/Shanghai"
-   restart: always
+    restart: always
-   networks:
+    networks:
       server:
         ipv4_address: ${ZOOKEEPER_NETWORK_ADDRESS}
 
@@ -142,3 +142,68 @@ services:
       server:
         ipv4_address: ${OPENIM_WEB_NETWORK_ADDRESS}
 
+  openim-admin:
+    image: ${IMAGE_REGISTRY}/openim-admin-front:v3.4.0
+    # image: ghcr.io/openimsdk/openim-admin-front:v3.4.0
+    # image: registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-admin-front:v3.4.0
+    # image: openim/openim-admin-front:v3.4.0
+    container_name: openim-admin
+    restart: always
+    ports:
+      - "${OPENIM_ADMIN_FRONT_PORT}:80"
+    networks:
+      server:
+        ipv4_address: ${OPENIM_ADMIN_FRONT_NETWORK_ADDRESS}
+
+  prometheus:
+    image: prom/prometheus
+    container_name: prometheus
+    hostname: prometheus
+    restart: always
+    volumes:
+      - ./config/prometheus.yml:/etc/prometheus/prometheus.yml
+      - ./config/instance-down-rules.yml:/etc/prometheus/instance-down-rules.yml
+    ports:
+      - "${PROMETHEUS_PORT}:9090"
+    networks:
+      server:
+        ipv4_address: ${PROMETHEUS_NETWORK_ADDRESS}
+
+  alertmanager:
+    image: prom/alertmanager
+    container_name: alertmanager
+    hostname: alertmanager
+    restart: always
+    volumes:
+      - ./config/alertmanager.yml:/etc/alertmanager/alertmanager.yml
+      - ./config/email.tmpl:/etc/alertmanager/email.tmpl
+    ports:
+      - "${ALERT_MANAGER_PORT}:9093"
+    networks:
+      server:
+        ipv4_address: ${ALERT_MANAGER_NETWORK_ADDRESS}
+
+  grafana:
+    image: grafana/grafana
+    container_name: grafana
+    hostname: grafana
+    user: root
+    restart: always
+    ports:
+      - "${GRAFANA_PORT}:3000"
+    volumes:
+      - ${DATA_DIR}/components/grafana:/var/lib/grafana
+    networks:
+      server:
+        ipv4_address: ${GRAFANA_NETWORK_ADDRESS}
+
+  node-exporter:
+    image: quay.io/prometheus/node-exporter
+    container_name: node-exporter
+    hostname: node-exporter
+    restart: always
+    ports:
+      - "${NODE_EXPORTER_PORT}:9100"
+    networks:
+      server:
+        ipv4_address: ${NODE_EXPORTER_NETWORK_ADDRESS}

docs/contrib/environment.md

@@ -150,7 +150,7 @@ For convenience, configuration through modifying environment variables is recomm
   + **Description**: API address.
   + **Note**: If the server has an external IP, it will be automatically obtained. For internal networks, set this variable to the IP serving internally.
 
-  ```
+  ```bash
   export API_URL="http://ip:10002"
   ```
 
@@ -412,7 +412,7 @@ Configuration for Grafana, including its port and address.
 
 | Parameter       | Example Value              | Description           |
 | --------------- | -------------------------- | --------------------- |
-| GRAFANA_PORT    | "3000"                     | Port used by Grafana. |
+| GRAFANA_PORT    | "13000"                     | Port used by Grafana. |
 | GRAFANA_ADDRESS | "${DOCKER_BRIDGE_GATEWAY}" | Address for Grafana.  |
 
 ###  2.16. <a name='RPCPortConfigurationVariables'></a>RPC Port Configuration Variables

docs/contrib/prometheus-grafana.md

@@ -0,0 +1,323 @@
+# Deployment and Design of OpenIM's Management Backend and Monitoring
+
+<!-- vscode-markdown-toc -->
+* 1. [Source Code & Docker](#SourceCodeDocker)
+	* 1.1. [Deployment](#Deployment)
+	* 1.2. [Configuration](#Configuration)
+	* 1.3. [Monitoring Running in Docker Guide](#MonitoringRunninginDockerGuide)
+		* 1.3.1. [Introduction](#Introduction)
+		* 1.3.2. [Prerequisites](#Prerequisites)
+		* 1.3.3. [Step 1: Clone the Repository](#Step1:ClonetheRepository)
+		* 1.3.4. [Step 2: Start Docker Compose](#Step2:StartDockerCompose)
+		* 1.3.5. [Step 3: Use the OpenIM Web Interface](#Step3:UsetheOpenIMWebInterface)
+		* 1.3.6. [Running Effect](#RunningEffect)
+		* 1.3.7. [Step 4: Access the Admin Panel](#Step4:AccesstheAdminPanel)
+		* 1.3.8. [Step 5: Access the Monitoring Interface](#Step5:AccesstheMonitoringInterface)
+		* 1.3.9. [Next Steps](#NextSteps)
+		* 1.3.10. [Troubleshooting](#Troubleshooting)
+* 2. [Kubernetes](#Kubernetes)
+	* 2.1. [Middleware Monitoring](#MiddlewareMonitoring)
+	* 2.2. [Custom OpenIM Metrics](#CustomOpenIMMetrics)
+	* 2.3. [Node Exporter](#NodeExporter)
+* 3. [Setting Up and Configuring AlertManager Using Environment Variables and `make init`](#SettingUpandConfiguringAlertManagerUsingEnvironmentVariablesandmakeinit)
+	* 3.1. [Introduction](#Introduction-1)
+	* 3.2. [Prerequisites](#Prerequisites-1)
+	* 3.3. [Configuration Steps](#ConfigurationSteps)
+		* 3.3.1. [Exporting Environment Variables](#ExportingEnvironmentVariables)
+		* 3.3.2. [Initializing AlertManager](#InitializingAlertManager)
+		* 3.3.3. [Key Configuration Fields](#KeyConfigurationFields)
+		* 3.3.4. [Configuring SMTP Authentication Password](#ConfiguringSMTPAuthenticationPassword)
+		* 3.3.5. [Useful Links for Common Email Servers](#UsefulLinksforCommonEmailServers)
+	* 3.4. [Conclusion](#Conclusion)
+
+<!-- vscode-markdown-toc-config
+	numbering=true
+	autoSave=true
+	/vscode-markdown-toc-config -->
+<!-- /vscode-markdown-toc -->
+
+OpenIM offers various flexible deployment options to suit different environments and requirements. Here is a simplified and optimized description of these deployment options:
+
+1. Source Code Deployment:
+   + **Regular Source Code Deployment**: Deployment using the `nohup` method. This is a basic deployment method suitable for development and testing environments. For details, refer to the [Regular Source Code Deployment Guide](https://docs.openim.io/).
+   + **Production-Level Deployment**: Deployment using the `system` method, more suitable for production environments. This method provides higher stability and reliability. For details, refer to the [Production-Level Deployment Guide](https://docs.openim.io/guides/gettingStarted/install-openim-linux-system).
+2. Cluster Deployment:
+   + **Kubernetes Deployment**: Provides two deployment methods, including deployment through Helm and sealos. This is suitable for environments that require high availability and scalability. Specific methods can be found in the [Kubernetes Deployment Guide](https://docs.openim.io/guides/gettingStarted/k8s-deployment).
+3. Docker Deployment:
+   + **Regular Docker Deployment**: Suitable for quick deployments and small projects. For detailed information, refer to the [Docker Deployment Guide](https://docs.openim.io/guides/gettingStarted/dockerCompose).
+   + **Docker Compose Deployment**: Provides more convenient service management and configuration, suitable for complex multi-container applications.
+
+Next, we will introduce the specific steps, monitoring, and management backend configuration for each of these deployment methods, as well as usage tips to help you choose the most suitable deployment option according to your needs.
+
+##  1. <a name='SourceCodeDocker'></a>Source Code & Docker
+
+###  1.1. <a name='Deployment'></a>Deployment
+
+OpenIM deploys openim-server and openim-chat from source code, while other components are deployed via Docker.
+
+For Docker deployment, you can deploy all components with a single command using the [openimsdk/openim-docker](https://github.com/openimsdk/openim-docker) repository. The deployment configuration can be found in the [environment.sh](https://github.com/openimsdk/open-im-server/blob/main/scripts/install/environment.sh) document, which provides information on how to learn and familiarize yourself with various environment variables.
+
+For Prometheus, it is not enabled by default. To enable it, set the environment variable before executing `make init`:
+
+```bash
+export PROMETHEUS_ENABLE=true   # Default is false
+```
+
+Then, execute:
+
+```bash
+make init
+docker compose up -d
+```
+
+###  1.2. <a name='Configuration'></a>Configuration
+
+To configure Prometheus data sources in Grafana, follow these steps:
+
+1. **Log in to Grafana**: First, open your web browser and access the Grafana URL. If you haven't changed the port, the address is typically [http://localhost:13000](http://localhost:13000/).
+
+2. **Log in with default credentials**: Grafana's default username and password are both `admin`. You will be prompted to change the password on your first login.
+
+3. **Access Data Sources Settings**:
+
+   + In the left menu of Grafana, look for and click the "gear" icon representing "Configuration."
+   + In the configuration menu, select "Data Sources."
+
+4. **Add a New Data Source**:
+
+   + On the Data Sources page, click the "Add data source" button.
+   + In the list, find and select "Prometheus."
+
+   ![image-20231114175117374](http://sm.nsddd.top/sm202311141751692.png)
+
+   Click `Add New connection` to add more data sources, such as Loki (responsible for log storage and query processing).
+
+5. **Configure the Prometheus Data Source**:
+
+   + On the configuration page, fill in the details of the Prometheus server. This typically includes the URL of the Prometheus service (e.g., if Prometheus is running on the same machine as OpenIM, the URL might be `http://172.28.0.1:19090`, with the address matching the `DOCKER_BRIDGE_GATEWAY` variable address). OpenIM and the components are linked via a gateway. The default port used by OpenIM is `19090`.
+   + Adjust other settings as needed, such as authentication and TLS settings.
+
+   ![image-20231114180351923](http://sm.nsddd.top/sm202311141803076.png)
+
+6. **Save and Test**:
+
+   + After completing the configuration, click the "Save & Test" button to ensure that Grafana can successfully connect to Prometheus.
+
+**Importing Dashboards in Grafana**
+
+Importing Grafana Dashboards is a straightforward process and is applicable to OpenIM Server application services and Node Exporter. Here are detailed steps and necessary considerations:
+
+**Key Metrics Overview and Deployment Steps**
+
+To monitor OpenIM in Grafana, you need to focus on three categories of key metrics, each with its specific deployment and configuration steps:
+
+1. **OpenIM Metrics (`prometheus-dashboard.yaml`)**:
+   + **Configuration File Path**: Located at `config/prometheus-dashboard.yaml`.
+   + **Enabling Monitoring**: Set the environment variable `export PROMETHEUS_ENABLE=true` to enable Prometheus monitoring.
+   + **More Information**: Refer to the [OpenIM Configuration Guide](https://docs.openim.io/configurations/prometheus-integration).
+2. **Node Exporter**:
+   + **Container Deployment**: Deploy the `quay.io/prometheus/node-exporter` container for node monitoring.
+   + **Get Dashboard**: Access the [Node Exporter Full Feature Dashboard](https://grafana.com/grafana/dashboards/1860-node-exporter-full/) and import it using YAML file download or ID import.
+   + **Deployment Guide**: Refer to the [Node Exporter Deployment Documentation](https://prometheus.io/docs/guides/node-exporter/).
+3. **Middleware Metrics**: Each middleware requires specific steps and configurations to enable monitoring. Here is a list of common middleware and links to their respective setup guides:
+   + MySQL:
+     + **Configuration**: Ensure MySQL has performance monitoring enabled.
+     + **Link**: Refer to the [MySQL Monitoring Configuration Guide](https://grafana.com/docs/grafana/latest/datasources/mysql/).
+   + Redis:
+     + **Configuration**: Configure Redis to allow monitoring data export.
+     + **Link**: Refer to the [Redis Monitoring Guide](https://grafana.com/docs/grafana/latest/datasources/redis/).
+   + MongoDB:
+     + **Configuration**: Set up monitoring metrics for MongoDB.
+     + **Link**: Refer to the [MongoDB Monitoring Guide](https://grafana.com/grafana/plugins/grafana-mongodb-datasource/).
+   + Kafka:
+     + **Configuration**: Integrate Kafka with Prometheus monitoring.
+     + **Link**: Refer to the [Kafka Monitoring Guide](https://grafana.com/grafana/plugins/grafana-kafka-datasource/).
+   + Zookeeper:
+     + **Configuration**: Ensure Zookeeper can be monitored by Prometheus.
+     + **Link**: Refer to the [Zookeeper Monitoring Configuration](https://grafana.com/docs/grafana/latest/datasources/zookeeper/).
+
+
+
+**Importing Steps**:
+
+1. Access the Dashboard Import Interface:
+
+   + Click the `+` icon on the left menu or in the top right corner of Grafana, then select "Create."
+   + Choose "Import" to access the dashboard import interface.
+
+2. **Perform Dashboard Import**:
+   + **Upload via File**: Directly upload your YAML file.
+   + **Paste Content**: Open the YAML file, copy its content, and paste it into the import interface.
+   + **Import via Grafana.com Dashboard**: Visit [Grafana Dashboards](https://grafana.com/grafana/dashboards/), search for the desired dashboard, and import it using its ID.
+3. **Configure the Dashboard**:
+   + Select the appropriate data source, such as the previously configured Prometheus.
+   + Adjust other settings, such as the dashboard name or folder.
+4. **Save and View the Dashboard**:
+   + After configuring, click "Import" to complete the process.
+   + Immediately view the new dashboard after successful import.
+
+**Graph Examples:**
+
+![image-20231114194451673](http://sm.nsddd.top/sm202311141944953.png)
+
+
+
+###  1.3. <a name='MonitoringRunninginDockerGuide'></a>Monitoring Running in Docker Guide
+
+####  1.3.1. <a name='Introduction'></a>Introduction
+
+This guide provides the steps to run OpenIM using Docker. OpenIM is an open-source instant messaging solution that can be quickly deployed using Docker. For more information, please refer to the [OpenIM Docker GitHub](https://github.com/openimsdk/openim-docker).
+
+####  1.3.2. <a name='Prerequisites'></a>Prerequisites
+
++ Ensure that Docker and Docker Compose are installed.
++ Basic understanding of Docker and containerization technology.
+
+####  1.3.3. <a name='Step1:ClonetheRepository'></a>Step 1: Clone the Repository
+
+First, clone the OpenIM Docker repository:
+
+```bash
+git clone https://github.com/openimsdk/openim-docker.git
+```
+
+Navigate to the repository directory and check the `README` file for more information and configuration options.
+
+####  1.3.4. <a name='Step2:StartDockerCompose'></a>Step 2: Start Docker Compose
+
+In the repository directory, run the following command to start the service:
+
+```bash
+docker-compose up -d
+```
+
+This will download the required Docker images and start the OpenIM service.
+
+####  1.3.5. <a name='Step3:UsetheOpenIMWebInterface'></a>Step 3: Use the OpenIM Web Interface
+
++ Open a browser in private mode and access [OpenIM Web](http://localhost:11001/).
++ Register two users and try adding friends.
++ Test sending messages and pictures.
+
+####  1.3.6. <a name='RunningEffect'></a>Running Effect
+
+![image-20231115100811208](http://sm.nsddd.top/sm202311151008639.png)
+
+####  1.3.7. <a name='Step4:AccesstheAdminPanel'></a>Step 4: Access the Admin Panel
+
++ Access the [OpenIM Admin Panel](http://localhost:11002/).
++ Log in using the default username and password (`admin1:admin1`).
+
+Running Effect Image:
+
+![image-20231115101039837](http://sm.nsddd.top/sm202311151010116.png)
+
+####  1.3.8. <a name='Step5:AccesstheMonitoringInterface'></a>Step 5: Access the Monitoring Interface
+
++ Log in to the [Monitoring Interface](http://localhost:3000/login) using the credentials (`admin:admin`).
+
+####  1.3.9. <a name='NextSteps'></a>Next Steps
+
++ Configure and manage the services following the steps provided in the OpenIM source code.
++ Refer to the `README` file for advanced configuration and management.
+
+####  1.3.10. <a name='Troubleshooting'></a>Troubleshooting
+
++ If you encounter any issues, please check the documentation on [OpenIM Docker GitHub](https://github.com/openimsdk/openim-docker) or search for related issues in the Issues section.
++ If the problem persists, you can create an issue on the [openim-docker](https://github.com/openimsdk/openim-docker/issues/new/choose) repository or the [openim-server](https://github.com/openimsdk/open-im-server/issues/new/choose) repository.
+
+
+
+##  2. <a name='Kubernetes'></a>Kubernetes
+
+Refer to [openimsdk/helm-charts](https://github.com/openimsdk/helm-charts).
+
+When deploying and monitoring OpenIM in a Kubernetes environment, you will focus on three main metrics: middleware, custom OpenIM metrics, and Node Exporter. Here are detailed steps and guidelines:
+
+###  2.1. <a name='MiddlewareMonitoring'></a>Middleware Monitoring
+
+Middleware monitoring is crucial to ensure the overall system's stability. Typically, this includes monitoring the following components:
+
++ **MySQL**: Monitor database performance, query latency, and more.
++ **Redis**: Track operation latency, memory usage, and more.
++ **MongoDB**: Observe database operations, resource usage, and more.
++ **Kafka**: Monitor message throughput, latency, and more.
++ **Zookeeper**: Keep an eye on cluster status, performance metrics, and more.
+
+For Kubernetes environments, you can use the corresponding Prometheus Exporters to collect monitoring data for these middleware components.
+
+###  2.2. <a name='CustomOpenIMMetrics'></a>Custom OpenIM Metrics
+
+Custom OpenIM metrics provide essential information about the OpenIM application itself, such as user activity, message traffic, system performance, and more. To monitor these metrics in Kubernetes:
+
++ Ensure OpenIM application configurations expose Prometheus metrics.
++ When deploying using Helm charts (refer to [OpenIM Helm Charts](https://github.com/openimsdk/helm-charts)), pay attention to configuring relevant monitoring settings.
+
+###  2.3. <a name='NodeExporter'></a>Node Exporter
+
+Node Exporter is used to collect hardware and operating system-level metrics for Kubernetes nodes, such as CPU, memory, disk usage, and more. To integrate Node Exporter in Kubernetes:
+
++ Deploy Node Exporter using the appropriate Helm chart. You can find information and guides on [Prometheus Community](https://prometheus.io/docs/guides/node-exporter/).
++ Ensure Node Exporter's data is collected by Prometheus instances within your cluster.
+
+
+
+##  3. <a name='SettingUpandConfiguringAlertManagerUsingEnvironmentVariablesandmakeinit'></a>Setting Up and Configuring AlertManager Using Environment Variables and `make init`
+
+###  3.1. <a name='Introduction-1'></a>Introduction
+
+AlertManager, a component of the Prometheus monitoring system, handles alerts sent by client applications such as the Prometheus server. It takes care of deduplicating, grouping, and routing them to the correct receiver. This document outlines how to set up and configure AlertManager using environment variables and the `make init` command. We will focus on configuring key fields like the sender's email, SMTP settings, and SMTP authentication password.
+
+###  3.2. <a name='Prerequisites-1'></a>Prerequisites
+
++ Basic knowledge of terminal and command-line operations.
++ AlertManager installed on your system.
++ Access to an SMTP server for sending emails.
+
+###  3.3. <a name='ConfigurationSteps'></a>Configuration Steps
+
+####  3.3.1. <a name='ExportingEnvironmentVariables'></a>Exporting Environment Variables
+
+Before initializing AlertManager, you need to set environment variables. These variables are used to configure the AlertManager settings without altering the code. Use the `export` command in your terminal. Here are some key variables you might set:
+
++ `export ALERTMANAGER_RESOLVE_TIMEOUT='5m'`
++ `export ALERTMANAGER_SMTP_FROM='alert@example.com'`
++ `export ALERTMANAGER_SMTP_SMARTHOST='smtp.example.com:465'`
++ `export ALERTMANAGER_SMTP_AUTH_USERNAME='alert@example.com'`
++ `export ALERTMANAGER_SMTP_AUTH_PASSWORD='your_password'`
++ `export ALERTMANAGER_SMTP_REQUIRE_TLS='false'`
+
+####  3.3.2. <a name='InitializingAlertManager'></a>Initializing AlertManager
+
+After setting the necessary environment variables, you can initialize AlertManager by running the `make init` command. This command typically runs a script that prepares AlertManager with the provided configuration.
+
+####  3.3.3. <a name='KeyConfigurationFields'></a>Key Configuration Fields
+
+##### a. Sender's Email (`ALERTMANAGER_SMTP_FROM`)
+
+This variable sets the email address that will appear as the sender in the notifications sent by AlertManager.
+
+##### b. SMTP Configuration
+
++ **SMTP Server (`ALERTMANAGER_SMTP_SMARTHOST`):** Specifies the address and port of the SMTP server used for sending emails.
++ **SMTP Authentication Username (`ALERTMANAGER_SMTP_AUTH_USERNAME`):** The username for authenticating with the SMTP server.
++ **SMTP Authentication Password (`ALERTMANAGER_SMTP_AUTH_PASSWORD`):** The password for SMTP server authentication. It's crucial to keep this value secure.
+
+####  3.3.4. <a name='ConfiguringSMTPAuthenticationPassword'></a>Configuring SMTP Authentication Password
+
+The SMTP authentication password can be set using the `ALERTMANAGER_SMTP_AUTH_PASSWORD` environment variable. It's recommended to use a secure method to set this variable to avoid exposing sensitive information. For instance, you might read the password from a secure file or a secret management tool.
+
+####  3.3.5. <a name='UsefulLinksforCommonEmailServers'></a>Useful Links for Common Email Servers
+
+For specific configurations related to common email servers, you may refer to their respective documentation:
+
++ Gmail SMTP Settings:
+  + [Gmail SMTP Configuration](https://support.google.com/mail/answer/7126229?hl=en)
++ Microsoft Outlook SMTP Settings:
+  + [Outlook Email Settings](https://support.microsoft.com/en-us/office/pop-imap-and-smtp-settings-8361e398-8af4-4e97-b147-6c6c4ac95353)
++ Yahoo Mail SMTP Settings:
+  + [Yahoo SMTP Configuration](https://help.yahoo.com/kb/SLN4724.html)
+
+###  3.4. <a name='Conclusion'></a>Conclusion
+
+Setting up and configuring AlertManager with environment variables provides a flexible and secure way to manage alert settings. By following the above steps, you can easily configure AlertManager for your monitoring needs. Always ensure to secure sensitive information, especially when dealing with SMTP authentication credentials.

go.mod

@@ -44,6 +44,8 @@ require (
 	github.com/go-sql-driver/mysql v1.7.1
 	github.com/redis/go-redis/v9 v9.2.1
 	github.com/tencentyun/cos-go-sdk-v5 v0.7.45
+	go.uber.org/automaxprocs v1.5.3
+	golang.org/x/sync v0.4.0
 	gopkg.in/src-d/go-git.v4 v4.13.1
 	gotest.tools v2.2.0+incompatible
 )
@@ -127,12 +129,10 @@ require (
 	github.com/youmark/pkcs8 v0.0.0-20181117223130-1be2e3e5546d // indirect
 	go.opencensus.io v0.24.0 // indirect
 	go.uber.org/atomic v1.7.0 // indirect
-	go.uber.org/automaxprocs v1.5.3 // indirect
 	go.uber.org/multierr v1.6.0 // indirect
 	golang.org/x/arch v0.3.0 // indirect
 	golang.org/x/net v0.17.0 // indirect
 	golang.org/x/oauth2 v0.13.0 // indirect
-	golang.org/x/sync v0.4.0 // indirect
 	golang.org/x/sys v0.13.0 // indirect
 	golang.org/x/text v0.13.0 // indirect
 	golang.org/x/time v0.3.0 // indirect

go.sum

@@ -280,6 +280,7 @@ github.com/pkg/errors v0.9.1 h1:FEBLx1zS214owpjy7qsBeixbURkuhQAwrK5UwLGTwt4=
 github.com/pkg/errors v0.9.1/go.mod h1:bwawxfHBFNV+L2hUp1rHADufV3IMtnDRdf1r5NINEl0=
 github.com/pmezard/go-difflib v1.0.0 h1:4DBwDE0NGyQoBHbLQYPwSUPoCMWR5BEzIk/f1lZbAQM=
 github.com/pmezard/go-difflib v1.0.0/go.mod h1:iKH77koFhYxTK1pcRnkKkqfTogsbg7gZNVY4sRDYZ/4=
+github.com/prashantv/gostub v1.1.0 h1:BTyx3RfQjRHnUWaGF9oQos79AlQ5k8WNktv7VGvVH4g=
 github.com/prometheus/client_golang v1.17.0 h1:rl2sfwZMtSthVU752MqfjQozy7blglC+1SOtjMAMh+Q=
 github.com/prometheus/client_golang v1.17.0/go.mod h1:VeL+gMmOAxkS2IqfCq0ZmHSL+LjWfWDUmp1mBz9JgUY=
 github.com/prometheus/client_model v0.0.0-20190812154241-14fe0d1b01d4/go.mod h1:xMI15A0UPsDsEKsMN9yxemIoYk6Tm2C1GtYGdfGttqA=

internal/api/third.go

@@ -15,11 +15,12 @@
 package api
 
 import (
-	config2 "github.com/openimsdk/open-im-server/v3/pkg/common/config"
 	"math/rand"
 	"net/http"
 	"strconv"
 
+	config2 "github.com/openimsdk/open-im-server/v3/pkg/common/config"
+
 	"github.com/gin-gonic/gin"
 
 	"github.com/OpenIMSDK/protocol/third"

internal/msggateway/client.go

@@ -167,7 +167,7 @@ func (c *Client) readMessage() {
 func (c *Client) handleMessage(message []byte) error {
 	if c.IsCompress {
 		var err error
-		message, err = c.longConnServer.DeCompress(message)
+		message, err = c.longConnServer.DecompressWithPool(message)
 		if err != nil {
 			return utils.Wrap(err, "")
 		}
@@ -317,7 +317,7 @@ func (c *Client) writeBinaryMsg(resp Resp) error {
 
 	_ = c.conn.SetWriteDeadline(writeWait)
 	if c.IsCompress {
-		resultBuf, compressErr := c.longConnServer.Compress(encodedBuf)
+		resultBuf, compressErr := c.longConnServer.CompressWithPool(encodedBuf)
 		if compressErr != nil {
 			return utils.Wrap(compressErr, "")
 		}

internal/msggateway/compressor.go

@@ -17,14 +17,23 @@ package msggateway
 import (
 	"bytes"
 	"compress/gzip"
+	"errors"
 	"io"
+	"sync"
 
 	"github.com/OpenIMSDK/tools/utils"
 )
 
+var (
+	gzipWriterPool = sync.Pool{New: func() any { return gzip.NewWriter(nil) }}
+	gzipReaderPool = sync.Pool{New: func() any { return new(gzip.Reader) }}
+)
+
 type Compressor interface {
 	Compress(rawData []byte) ([]byte, error)
+	CompressWithPool(rawData []byte) ([]byte, error)
 	DeCompress(compressedData []byte) ([]byte, error)
+	DecompressWithPool(compressedData []byte) ([]byte, error)
 }
 type GzipCompressor struct {
 	compressProtocol string
@@ -46,6 +55,22 @@ func (g *GzipCompressor) Compress(rawData []byte) ([]byte, error) {
 	return gzipBuffer.Bytes(), nil
 }
 
+func (g *GzipCompressor) CompressWithPool(rawData []byte) ([]byte, error) {
+	gz := gzipWriterPool.Get().(*gzip.Writer)
+	defer gzipWriterPool.Put(gz)
+
+	gzipBuffer := bytes.Buffer{}
+	gz.Reset(&gzipBuffer)
+
+	if _, err := gz.Write(rawData); err != nil {
+		return nil, utils.Wrap(err, "")
+	}
+	if err := gz.Close(); err != nil {
+		return nil, utils.Wrap(err, "")
+	}
+	return gzipBuffer.Bytes(), nil
+}
+
 func (g *GzipCompressor) DeCompress(compressedData []byte) ([]byte, error) {
 	buff := bytes.NewBuffer(compressedData)
 	reader, err := gzip.NewReader(buff)
@@ -59,3 +84,23 @@ func (g *GzipCompressor) DeCompress(compressedData []byte) ([]byte, error) {
 	_ = reader.Close()
 	return compressedData, nil
 }
+
+func (g *GzipCompressor) DecompressWithPool(compressedData []byte) ([]byte, error) {
+	reader := gzipReaderPool.Get().(*gzip.Reader)
+	if reader == nil {
+		return nil, errors.New("NewReader failed")
+	}
+	defer gzipReaderPool.Put(reader)
+
+	err := reader.Reset(bytes.NewReader(compressedData))
+	if err != nil {
+		return nil, utils.Wrap(err, "NewReader failed")
+	}
+
+	compressedData, err = io.ReadAll(reader)
+	if err != nil {
+		return nil, utils.Wrap(err, "ReadAll failed")
+	}
+	_ = reader.Close()
+	return compressedData, nil
+}

internal/msggateway/compressor_test.go

@@ -0,0 +1,107 @@
+package msggateway
+
+import (
+	"crypto/rand"
+	"sync"
+	"testing"
+
+	"github.com/stretchr/testify/assert"
+)
+
+func mockRandom() []byte {
+	bs := make([]byte, 50)
+	rand.Read(bs)
+	return bs
+}
+
+func TestCompressDecompress(t *testing.T) {
+
+	compressor := NewGzipCompressor()
+
+	for i := 0; i < 2000; i++ {
+		src := mockRandom()
+
+		// compress
+		dest, err := compressor.CompressWithPool(src)
+		assert.Equal(t, nil, err)
+
+		// decompress
+		res, err := compressor.DecompressWithPool(dest)
+		assert.Equal(t, nil, err)
+
+		// check
+		assert.EqualValues(t, src, res)
+	}
+}
+
+func TestCompressDecompressWithConcurrency(t *testing.T) {
+	wg := sync.WaitGroup{}
+	compressor := NewGzipCompressor()
+
+	for i := 0; i < 200; i++ {
+		wg.Add(1)
+		go func() {
+			defer wg.Done()
+			src := mockRandom()
+
+			// compress
+			dest, err := compressor.CompressWithPool(src)
+			assert.Equal(t, nil, err)
+
+			// decompress
+			res, err := compressor.DecompressWithPool(dest)
+			assert.Equal(t, nil, err)
+
+			// check
+			assert.EqualValues(t, src, res)
+
+		}()
+	}
+	wg.Wait()
+}
+
+func BenchmarkCompress(b *testing.B) {
+	src := mockRandom()
+	compressor := NewGzipCompressor()
+
+	for i := 0; i < b.N; i++ {
+		_, err := compressor.Compress(src)
+		assert.Equal(b, nil, err)
+	}
+}
+
+func BenchmarkCompressWithSyncPool(b *testing.B) {
+	src := mockRandom()
+
+	compressor := NewGzipCompressor()
+	for i := 0; i < b.N; i++ {
+		_, err := compressor.CompressWithPool(src)
+		assert.Equal(b, nil, err)
+	}
+}
+
+func BenchmarkDecompress(b *testing.B) {
+	src := mockRandom()
+
+	compressor := NewGzipCompressor()
+	comdata, err := compressor.Compress(src)
+	assert.Equal(b, nil, err)
+
+	for i := 0; i < b.N; i++ {
+		_, err := compressor.DeCompress(comdata)
+		assert.Equal(b, nil, err)
+	}
+}
+
+func BenchmarkDecompressWithSyncPool(b *testing.B) {
+	src := mockRandom()
+
+	compressor := NewGzipCompressor()
+	comdata, err := compressor.Compress(src)
+	assert.Equal(b, nil, err)
+
+	for i := 0; i < b.N; i++ {
+		_, err := compressor.DecompressWithPool(comdata)
+		assert.Equal(b, nil, err)
+	}
+}

internal/msggateway/hub_server.go

@@ -17,22 +17,19 @@ package msggateway
 import (
 	"context"
 
-	"github.com/OpenIMSDK/tools/mcontext"
-
-	"github.com/openimsdk/open-im-server/v3/pkg/authverify"
-
-	"github.com/OpenIMSDK/tools/errs"
 	"google.golang.org/grpc"
 
-	"github.com/openimsdk/open-im-server/v3/pkg/common/db/cache"
-
 	"github.com/OpenIMSDK/protocol/constant"
 	"github.com/OpenIMSDK/protocol/msggateway"
 	"github.com/OpenIMSDK/tools/discoveryregistry"
+	"github.com/OpenIMSDK/tools/errs"
 	"github.com/OpenIMSDK/tools/log"
+	"github.com/OpenIMSDK/tools/mcontext"
 	"github.com/OpenIMSDK/tools/utils"
 
+	"github.com/openimsdk/open-im-server/v3/pkg/authverify"
 	"github.com/openimsdk/open-im-server/v3/pkg/common/config"
+	"github.com/openimsdk/open-im-server/v3/pkg/common/db/cache"
 	"github.com/openimsdk/open-im-server/v3/pkg/common/startrpc"
 )
 
@@ -41,6 +38,7 @@ func (s *Server) InitServer(disCov discoveryregistry.SvcDiscoveryRegistry, serve
 	if err != nil {
 		return err
 	}
+
 	msgModel := cache.NewMsgCacheModel(rdb)
 	s.LongConnServer.SetDiscoveryRegistry(disCov)
 	s.LongConnServer.SetCacheHandler(msgModel)
@@ -97,22 +95,25 @@ func (s *Server) GetUsersOnlineStatus(
 		if !ok {
 			continue
 		}
-		temp := new(msggateway.GetUsersOnlineStatusResp_SuccessResult)
+
-		temp.UserID = userID
+		uresp := new(msggateway.GetUsersOnlineStatusResp_SuccessResult)
+		uresp.UserID = userID
 		for _, client := range clients {
-			if client != nil {
+			if client == nil {
-				ps := new(msggateway.GetUsersOnlineStatusResp_SuccessDetail)
+				continue
-				ps.Platform = constant.PlatformIDToName(client.PlatformID)
-				ps.Status = constant.OnlineStatus
-				ps.ConnID = client.ctx.GetConnID()
-				ps.Token = client.token
-				ps.IsBackground = client.IsBackground
-				temp.Status = constant.OnlineStatus
-				temp.DetailPlatformStatus = append(temp.DetailPlatformStatus, ps)
 			}
+
+			ps := new(msggateway.GetUsersOnlineStatusResp_SuccessDetail)
+			ps.Platform = constant.PlatformIDToName(client.PlatformID)
+			ps.Status = constant.OnlineStatus
+			ps.ConnID = client.ctx.GetConnID()
+			ps.Token = client.token
+			ps.IsBackground = client.IsBackground
+			uresp.Status = constant.OnlineStatus
+			uresp.DetailPlatformStatus = append(uresp.DetailPlatformStatus, ps)
 		}
-		if temp.Status == constant.OnlineStatus {
+		if uresp.Status == constant.OnlineStatus {
-			resp.SuccessResult = append(resp.SuccessResult, temp)
+			resp.SuccessResult = append(resp.SuccessResult, uresp)
 		}
 	}
 	return &resp, nil
@@ -129,50 +130,55 @@ func (s *Server) SuperGroupOnlineBatchPushOneMsg(
 	ctx context.Context,
 	req *msggateway.OnlineBatchPushOneMsgReq,
 ) (*msggateway.OnlineBatchPushOneMsgResp, error) {
-	var singleUserResult []*msggateway.SingleMsgToUserResults
+
+	var singleUserResults []*msggateway.SingleMsgToUserResults
+
 	for _, v := range req.PushToUserIDs {
 		var resp []*msggateway.SingleMsgToUserPlatform
-		tempT := &msggateway.SingleMsgToUserResults{
+		results := &msggateway.SingleMsgToUserResults{
 			UserID: v,
 		}
 		clients, ok := s.LongConnServer.GetUserAllCons(v)
 		if !ok {
 			log.ZDebug(ctx, "push user not online", "userID", v)
-			tempT.Resp = resp
+			results.Resp = resp
-			singleUserResult = append(singleUserResult, tempT)
+			singleUserResults = append(singleUserResults, results)
 			continue
 		}
+
 		log.ZDebug(ctx, "push user online", "clients", clients, "userID", v)
 		for _, client := range clients {
-			if client != nil {
+			if client == nil {
-				temp := &msggateway.SingleMsgToUserPlatform{
+				continue
-					RecvID:         v,
+			}
-					RecvPlatFormID: int32(client.PlatformID),
+
-				}
+			userPlatform := &msggateway.SingleMsgToUserPlatform{
-				if !client.IsBackground ||
+				RecvID:         v,
-					(client.IsBackground == true && client.PlatformID != constant.IOSPlatformID) {
+				RecvPlatFormID: int32(client.PlatformID),
-					err := client.PushMessage(ctx, req.MsgData)
+			}
-					if err != nil {
+			if !client.IsBackground ||
-						temp.ResultCode = -2
+				(client.IsBackground && client.PlatformID != constant.IOSPlatformID) {
-						resp = append(resp, temp)
+				err := client.PushMessage(ctx, req.MsgData)
-					} else {
+				if err != nil {
-						if utils.IsContainInt(client.PlatformID, s.pushTerminal) {
+					userPlatform.ResultCode = -2
-							tempT.OnlinePush = true
+					resp = append(resp, userPlatform)
-							resp = append(resp, temp)
-						}
-					}
 				} else {
-					temp.ResultCode = -3
+					if utils.IsContainInt(client.PlatformID, s.pushTerminal) {
-					resp = append(resp, temp)
+						results.OnlinePush = true
+						resp = append(resp, userPlatform)
+					}
 				}
+			} else {
+				userPlatform.ResultCode = -3
+				resp = append(resp, userPlatform)
 			}
 		}
-		tempT.Resp = resp
+		results.Resp = resp
-		singleUserResult = append(singleUserResult, tempT)
+		singleUserResults = append(singleUserResults, results)
 	}
 
 	return &msggateway.OnlineBatchPushOneMsgResp{
-		SinglePushResult: singleUserResult,
+		SinglePushResult: singleUserResults,
 	}, nil
 }
 
@@ -181,17 +187,21 @@ func (s *Server) KickUserOffline(
 	req *msggateway.KickUserOfflineReq,
 ) (*msggateway.KickUserOfflineResp, error) {
 	for _, v := range req.KickUserIDList {
-		if clients, _, ok := s.LongConnServer.GetUserPlatformCons(v, int(req.PlatformID)); ok {
+		clients, _, ok := s.LongConnServer.GetUserPlatformCons(v, int(req.PlatformID))
-			for _, client := range clients {
+		if !ok {
-				log.ZDebug(ctx, "kick user offline", "userID", v, "platformID", req.PlatformID, "client", client)
-				if err := client.longConnServer.KickUserConn(client); err != nil {
-					log.ZWarn(ctx, "kick user offline failed", err, "userID", v, "platformID", req.PlatformID)
-				}
-			}
-		} else {
 			log.ZInfo(ctx, "conn not exist", "userID", v, "platformID", req.PlatformID)
+			continue
 		}
+
+		for _, client := range clients {
+			log.ZDebug(ctx, "kick user offline", "userID", v, "platformID", req.PlatformID, "client", client)
+			if err := client.longConnServer.KickUserConn(client); err != nil {
+				log.ZWarn(ctx, "kick user offline failed", err, "userID", v, "platformID", req.PlatformID)
+			}
+		}
+		continue
 	}
+
 	return &msggateway.KickUserOfflineResp{}, nil
 }
 

internal/msggateway/init.go

@@ -23,7 +23,7 @@ import (
 	"github.com/openimsdk/open-im-server/v3/pkg/common/config"
 )
 
-// RunWsAndServer run ws server
+// RunWsAndServer run ws server.
 func RunWsAndServer(rpcPort, wsPort, prometheusPort int) error {
 	fmt.Println(
 		"start rpc/msg_gateway server, port: ",
@@ -37,7 +37,9 @@ func RunWsAndServer(rpcPort, wsPort, prometheusPort int) error {
 		WithPort(wsPort),
 		WithMaxConnNum(int64(config.Config.LongConnSvr.WebsocketMaxConnNum)),
 		WithHandshakeTimeout(time.Duration(config.Config.LongConnSvr.WebsocketTimeout)*time.Second),
-		WithMessageMaxMsgLength(config.Config.LongConnSvr.WebsocketMaxMsgLen))
+		WithMessageMaxMsgLength(config.Config.LongConnSvr.WebsocketMaxMsgLen),
+		WithWriteBufferSize(config.Config.LongConnSvr.WebsocketWriteBufferSize),
+	)
 	if err != nil {
 		return err
 	}

internal/msggateway/long_conn.go

@@ -50,10 +50,11 @@ type GWebSocket struct {
 	protocolType     int
 	conn             *websocket.Conn
 	handshakeTimeout time.Duration
+	writeBufferSize  int
 }
 
-func newGWebSocket(protocolType int, handshakeTimeout time.Duration) *GWebSocket {
+func newGWebSocket(protocolType int, handshakeTimeout time.Duration, wbs int) *GWebSocket {
-	return &GWebSocket{protocolType: protocolType, handshakeTimeout: handshakeTimeout}
+	return &GWebSocket{protocolType: protocolType, handshakeTimeout: handshakeTimeout, writeBufferSize: wbs}
 }
 
 func (d *GWebSocket) Close() error {
@@ -65,6 +66,10 @@ func (d *GWebSocket) GenerateLongConn(w http.ResponseWriter, r *http.Request) er
 		HandshakeTimeout: d.handshakeTimeout,
 		CheckOrigin:      func(r *http.Request) bool { return true },
 	}
+	if d.writeBufferSize > 0 { // default is 4kb.
+		upgrader.WriteBufferSize = d.writeBufferSize
+	}
+
 	conn, err := upgrader.Upgrade(w, r, nil)
 	if err != nil {
 		return err

internal/msggateway/n_ws_server.go

@@ -23,26 +23,22 @@ import (
 	"sync/atomic"
 	"time"
 
-	"github.com/OpenIMSDK/protocol/msggateway"
+	"github.com/go-playground/validator/v10"
-
+	"github.com/redis/go-redis/v9"
-	"github.com/openimsdk/open-im-server/v3/pkg/authverify"
+	"golang.org/x/sync/errgroup"
-	"github.com/openimsdk/open-im-server/v3/pkg/rpcclient"
 
 	"github.com/OpenIMSDK/protocol/constant"
-
+	"github.com/OpenIMSDK/protocol/msggateway"
-	"github.com/openimsdk/open-im-server/v3/pkg/common/config"
-	"github.com/openimsdk/open-im-server/v3/pkg/common/db/cache"
-	"github.com/openimsdk/open-im-server/v3/pkg/common/prommetrics"
-
-	"github.com/redis/go-redis/v9"
-
 	"github.com/OpenIMSDK/tools/discoveryregistry"
-
-	"github.com/go-playground/validator/v10"
-
 	"github.com/OpenIMSDK/tools/errs"
 	"github.com/OpenIMSDK/tools/log"
 	"github.com/OpenIMSDK/tools/utils"
+
+	"github.com/openimsdk/open-im-server/v3/pkg/authverify"
+	"github.com/openimsdk/open-im-server/v3/pkg/common/config"
+	"github.com/openimsdk/open-im-server/v3/pkg/common/db/cache"
+	"github.com/openimsdk/open-im-server/v3/pkg/common/prommetrics"
+	"github.com/openimsdk/open-im-server/v3/pkg/rpcclient"
 )
 
 type LongConnServer interface {
@@ -61,12 +57,6 @@ type LongConnServer interface {
 	MessageHandler
 }
 
-var bufferPool = sync.Pool{
-	New: func() interface{} {
-		return make([]byte, 1024)
-	},
-}
-
 type WsServer struct {
 	port              int
 	wsMaxConnNum      int64
@@ -78,7 +68,7 @@ type WsServer struct {
 	onlineUserNum     atomic.Int64
 	onlineUserConnNum atomic.Int64
 	handshakeTimeout  time.Duration
-	hubServer         *Server
+	writeBufferSize   int
 	validate          *validator.Validate
 	cache             cache.MsgModel
 	userClient        *rpcclient.UserRpcClient
@@ -148,6 +138,7 @@ func NewWsServer(opts ...Option) (*WsServer, error) {
 	return &WsServer{
 		port:             config.port,
 		wsMaxConnNum:     config.maxConnNum,
+		writeBufferSize:  config.writeBufferSize,
 		handshakeTimeout: config.handshakeTimeout,
 		clientPool: sync.Pool{
 			New: func() interface{} {
@@ -183,27 +174,39 @@ func (ws *WsServer) Run() error {
 	return http.ListenAndServe(":"+utils.IntToString(ws.port), nil) // Start listening
 }
 
+var concurrentRequest = 3
+
 func (ws *WsServer) sendUserOnlineInfoToOtherNode(ctx context.Context, client *Client) error {
 	conns, err := ws.disCov.GetConns(ctx, config.Config.RpcRegisterName.OpenImMessageGatewayName)
 	if err != nil {
 		return err
 	}
+
+	wg := errgroup.Group{}
+	wg.SetLimit(concurrentRequest)
+
 	// Online push user online message to other node
 	for _, v := range conns {
+		v := v // safe closure var
 		if v.Target() == ws.disCov.GetSelfConnTarget() {
 			log.ZDebug(ctx, "Filter out this node", "node", v.Target())
 			continue
 		}
-		msgClient := msggateway.NewMsgGatewayClient(v)
+
-		_, err := msgClient.MultiTerminalLoginCheck(ctx, &msggateway.MultiTerminalLoginCheckReq{
+		wg.Go(func() error {
-			UserID:     client.UserID,
+			msgClient := msggateway.NewMsgGatewayClient(v)
-			PlatformID: int32(client.PlatformID), Token: client.token,
+			_, err := msgClient.MultiTerminalLoginCheck(ctx, &msggateway.MultiTerminalLoginCheckReq{
+				UserID:     client.UserID,
+				PlatformID: int32(client.PlatformID), Token: client.token,
+			})
+			if err != nil {
+				log.ZWarn(ctx, "MultiTerminalLoginCheck err", err, "node", v.Target())
+			}
+			return nil
 		})
-		if err != nil {
-			log.ZWarn(ctx, "MultiTerminalLoginCheck err", err, "node", v.Target())
-			continue
-		}
 	}
+
+	_ = wg.Wait()
 	return nil
 }
 
@@ -289,70 +292,72 @@ func (ws *WsServer) multiTerminalLoginChecker(clientOK bool, oldClients []*Clien
 		}
 		fallthrough
 	case constant.AllLoginButSameTermKick:
-		if clientOK {
+		if !clientOK {
-			isDeleteUser := ws.clients.deleteClients(newClient.UserID, oldClients)
+			return
-			if isDeleteUser {
+		}
-				ws.onlineUserNum.Add(-1)
+
+		isDeleteUser := ws.clients.deleteClients(newClient.UserID, oldClients)
+		if isDeleteUser {
+			ws.onlineUserNum.Add(-1)
+		}
+		for _, c := range oldClients {
+			err := c.KickOnlineMessage()
+			if err != nil {
+				log.ZWarn(c.ctx, "KickOnlineMessage", err)
 			}
-			for _, c := range oldClients {
+		}
-				err := c.KickOnlineMessage()
+		m, err := ws.cache.GetTokensWithoutError(
-				if err != nil {
+			newClient.ctx,
-					log.ZWarn(c.ctx, "KickOnlineMessage", err)
+			newClient.UserID,
-				}
+			newClient.PlatformID,
-			}
+		)
-			m, err := ws.cache.GetTokensWithoutError(
+		if err != nil && err != redis.Nil {
+			log.ZWarn(
 				newClient.ctx,
-				newClient.UserID,
+				"get token from redis err",
-				newClient.PlatformID,
+				err,
-			)
-			if err != nil && err != redis.Nil {
-				log.ZWarn(
-					newClient.ctx,
-					"get token from redis err",
-					err,
-					"userID",
-					newClient.UserID,
-					"platformID",
-					newClient.PlatformID,
-				)
-				return
-			}
-			if m == nil {
-				log.ZWarn(
-					newClient.ctx,
-					"m is nil",
-					errors.New("m is nil"),
-					"userID",
-					newClient.UserID,
-					"platformID",
-					newClient.PlatformID,
-				)
-				return
-			}
-			log.ZDebug(
-				newClient.ctx,
-				"get token from redis",
 				"userID",
 				newClient.UserID,
 				"platformID",
 				newClient.PlatformID,
-				"tokenMap",
-				m,
 			)
+			return
+		}
+		if m == nil {
+			log.ZWarn(
+				newClient.ctx,
+				"m is nil",
+				errors.New("m is nil"),
+				"userID",
+				newClient.UserID,
+				"platformID",
+				newClient.PlatformID,
+			)
+			return
+		}
+		log.ZDebug(
+			newClient.ctx,
+			"get token from redis",
+			"userID",
+			newClient.UserID,
+			"platformID",
+			newClient.PlatformID,
+			"tokenMap",
+			m,
+		)
 
-			for k := range m {
+		for k := range m {
-				if k != newClient.ctx.GetToken() {
+			if k != newClient.ctx.GetToken() {
-					m[k] = constant.KickedToken
+				m[k] = constant.KickedToken
-				}
-			}
-			log.ZDebug(newClient.ctx, "set token map is ", "token map", m, "userID",
-				newClient.UserID, "token", newClient.ctx.GetToken())
-			err = ws.cache.SetTokenMapByUidPid(newClient.ctx, newClient.UserID, newClient.PlatformID, m)
-			if err != nil {
-				log.ZWarn(newClient.ctx, "SetTokenMapByUidPid err", err, "userID", newClient.UserID, "platformID", newClient.PlatformID)
-				return
 			}
 		}
+		log.ZDebug(newClient.ctx, "set token map is ", "token map", m, "userID",
+			newClient.UserID, "token", newClient.ctx.GetToken())
+		err = ws.cache.SetTokenMapByUidPid(newClient.ctx, newClient.UserID, newClient.PlatformID, m)
+		if err != nil {
+			log.ZWarn(newClient.ctx, "SetTokenMapByUidPid err", err, "userID", newClient.UserID, "platformID", newClient.PlatformID)
+			return
+		}
 	}
 }
 
@@ -365,7 +370,7 @@ func (ws *WsServer) unregisterClient(client *Client) {
 	}
 	ws.onlineUserConnNum.Add(-1)
 	ws.SetUserOnlineStatus(client.ctx, client, constant.Offline)
-	log.ZInfo(client.ctx, "user offline", "close reason", client.closedErr, "online user Num", ws.onlineUserNum, "online user conn Num",
+	log.ZInfo(client.ctx, "user offline", "close reason", client.closedErr, "online user Num", ws.onlineUserNum.Load(), "online user conn Num",
 		ws.onlineUserConnNum.Load(),
 	)
 }
@@ -404,7 +409,7 @@ func (ws *WsServer) wsHandler(w http.ResponseWriter, r *http.Request) {
 		httpError(connContext, errs.ErrConnArgsErr)
 		return
 	}
-	if err := authverify.WsVerifyToken(token, userID, platformID); err != nil {
+	if err = authverify.WsVerifyToken(token, userID, platformID); err != nil {
 		httpError(connContext, err)
 		return
 	}
@@ -427,7 +432,8 @@ func (ws *WsServer) wsHandler(w http.ResponseWriter, r *http.Request) {
 		httpError(connContext, errs.ErrTokenNotExist.Wrap())
 		return
 	}
-	wsLongConn := newGWebSocket(WebSocket, ws.handshakeTimeout)
+
+	wsLongConn := newGWebSocket(WebSocket, ws.handshakeTimeout, ws.writeBufferSize)
 	err = wsLongConn.GenerateLongConn(w, r)
 	if err != nil {
 		httpError(connContext, err)

internal/msggateway/options.go

@@ -27,6 +27,8 @@ type (
 		handshakeTimeout time.Duration
 		// 允许消息最大长度
 		messageMaxMsgLength int
+		// websocket write buffer, default: 4096, 4kb.
+		writeBufferSize int
 	}
 )
 
@@ -53,3 +55,9 @@ func WithMessageMaxMsgLength(length int) Option {
 		opt.messageMaxMsgLength = length
 	}
 }
+
+func WithWriteBufferSize(size int) Option {
+	return func(opt *configs) {
+		opt.writeBufferSize = size
+	}
+}

internal/msgtransfer/init.go

@@ -21,14 +21,13 @@ import (
 	"net/http"
 	"sync"
 
+	"github.com/OpenIMSDK/tools/mw"
 	"github.com/prometheus/client_golang/prometheus"
 	"github.com/prometheus/client_golang/prometheus/collectors"
 	"github.com/prometheus/client_golang/prometheus/promhttp"
 	"google.golang.org/grpc"
 	"google.golang.org/grpc/credentials/insecure"
 
-	"github.com/OpenIMSDK/tools/mw"
-
 	"github.com/openimsdk/open-im-server/v3/pkg/common/config"
 	"github.com/openimsdk/open-im-server/v3/pkg/common/db/cache"
 	"github.com/openimsdk/open-im-server/v3/pkg/common/db/controller"

internal/msgtransfer/online_history_msg_handler.go

@@ -427,49 +427,62 @@ func (och *OnlineHistoryRedisConsumerHandler) ConsumeClaim(
 			break
 		}
 	}
-	rwLock := new(sync.RWMutex)
 	log.ZDebug(context.Background(), "online new session msg come", "highWaterMarkOffset",
 		claim.HighWaterMarkOffset(), "topic", claim.Topic(), "partition", claim.Partition())
-	cMsg := make([]*sarama.ConsumerMessage, 0, 1000)
+
-	t := time.NewTicker(time.Millisecond * 100)
+	split := 1000
+	rwLock := new(sync.RWMutex)
+	messages := make([]*sarama.ConsumerMessage, 0, 1000)
+	ticker := time.NewTicker(time.Millisecond * 100)
+
 	go func() {
 		for {
 			select {
-			case <-t.C:
+			case <-ticker.C:
-				if len(cMsg) > 0 {
+				if len(messages) == 0 {
-					rwLock.Lock()
+					continue
-					ccMsg := make([]*sarama.ConsumerMessage, 0, 1000)
-					for _, v := range cMsg {
-						ccMsg = append(ccMsg, v)
-					}
-					cMsg = make([]*sarama.ConsumerMessage, 0, 1000)
-					rwLock.Unlock()
-					split := 1000
-					ctx := mcontext.WithTriggerIDContext(context.Background(), utils.OperationIDGenerator())
-					log.ZDebug(ctx, "timer trigger msg consumer start", "length", len(ccMsg))
-					for i := 0; i < len(ccMsg)/split; i++ {
-						// log.Debug()
-						och.msgDistributionCh <- Cmd2Value{Cmd: ConsumerMsgs, Value: TriggerChannelValue{
-							ctx: ctx, cMsgList: ccMsg[i*split : (i+1)*split],
-						}}
-					}
-					if (len(ccMsg) % split) > 0 {
-						och.msgDistributionCh <- Cmd2Value{Cmd: ConsumerMsgs, Value: TriggerChannelValue{
-							ctx: ctx, cMsgList: ccMsg[split*(len(ccMsg)/split):],
-						}}
-					}
-					log.ZDebug(ctx, "timer trigger msg consumer end", "length", len(ccMsg))
 				}
+
+				rwLock.Lock()
+				buffer := make([]*sarama.ConsumerMessage, 0, len(messages))
+				buffer = append(buffer, messages...)
+
+				// reuse slice, set cap to 0
+				messages = messages[:0]
+				rwLock.Unlock()
+
+				start := time.Now()
+				ctx := mcontext.WithTriggerIDContext(context.Background(), utils.OperationIDGenerator())
+				log.ZDebug(ctx, "timer trigger msg consumer start", "length", len(buffer))
+				for i := 0; i < len(buffer)/split; i++ {
+					och.msgDistributionCh <- Cmd2Value{Cmd: ConsumerMsgs, Value: TriggerChannelValue{
+						ctx: ctx, cMsgList: buffer[i*split : (i+1)*split],
+					}}
+				}
+				if (len(buffer) % split) > 0 {
+					och.msgDistributionCh <- Cmd2Value{Cmd: ConsumerMsgs, Value: TriggerChannelValue{
+						ctx: ctx, cMsgList: buffer[split*(len(buffer)/split):],
+					}}
+				}
+
+				log.ZDebug(ctx, "timer trigger msg consumer end",
+					"length", len(buffer), "time_cost", time.Since(start),
+				)
 			}
 		}
 	}()
+
 	for msg := range claim.Messages() {
-		rwLock.Lock()
+		if len(msg.Value) == 0 {
-		if len(msg.Value) != 0 {
+			continue
-			cMsg = append(cMsg, msg)
 		}
+
+		rwLock.Lock()
+		messages = append(messages, msg)
 		rwLock.Unlock()
+
 		sess.MarkMessage(msg, "")
 	}
+
 	return nil
 }

internal/push/offlinepush/dummy/push.go

@@ -2,6 +2,7 @@ package dummy
 
 import (
 	"context"
+
 	"github.com/openimsdk/open-im-server/v3/internal/push/offlinepush"
 )
 

internal/push/push_to_client.go

@@ -18,8 +18,9 @@ import (
 	"context"
 	"encoding/json"
 	"errors"
+	"sync"
 
-	"github.com/openimsdk/open-im-server/v3/pkg/msgprocessor"
+	"golang.org/x/sync/errgroup"
 
 	"github.com/OpenIMSDK/protocol/constant"
 	"github.com/OpenIMSDK/protocol/conversation"
@@ -40,6 +41,7 @@ import (
 	"github.com/openimsdk/open-im-server/v3/pkg/common/db/controller"
 	"github.com/openimsdk/open-im-server/v3/pkg/common/db/localcache"
 	"github.com/openimsdk/open-im-server/v3/pkg/common/prommetrics"
+	"github.com/openimsdk/open-im-server/v3/pkg/msgprocessor"
 	"github.com/openimsdk/open-im-server/v3/pkg/rpcclient"
 )
 
@@ -285,18 +287,44 @@ func (p *Pusher) GetConnsAndOnlinePush(ctx context.Context, msg *sdkws.MsgData,
 	if err != nil {
 		return nil, err
 	}
-	// Online push message
+
-	for _, v := range conns {
+	var (
-		msgClient := msggateway.NewMsgGatewayClient(v)
+		mu         sync.Mutex
-		reply, err := msgClient.SuperGroupOnlineBatchPushOneMsg(ctx, &msggateway.OnlineBatchPushOneMsgReq{MsgData: msg, PushToUserIDs: pushToUserIDs})
+		wg         = errgroup.Group{}
-		if err != nil {
+		input      = &msggateway.OnlineBatchPushOneMsgReq{MsgData: msg, PushToUserIDs: pushToUserIDs}
-			continue
+		maxWorkers = config.Config.Push.MaxConcurrentWorkers
-		}
+	)
-		log.ZDebug(ctx, "push result", "reply", reply)
+
-		if reply != nil && reply.SinglePushResult != nil {
+	if maxWorkers < 3 {
-			wsResults = append(wsResults, reply.SinglePushResult...)
+		maxWorkers = 3
-		}
 	}
+
+	wg.SetLimit(maxWorkers)
+
+	// Online push message
+	for _, conn := range conns {
+		conn := conn // loop var safe
+		wg.Go(func() error {
+			msgClient := msggateway.NewMsgGatewayClient(conn)
+			reply, err := msgClient.SuperGroupOnlineBatchPushOneMsg(ctx, input)
+			if err != nil {
+				return nil
+			}
+
+			log.ZDebug(ctx, "push result", "reply", reply)
+			if reply != nil && reply.SinglePushResult != nil {
+				mu.Lock()
+				wsResults = append(wsResults, reply.SinglePushResult...)
+				mu.Unlock()
+			}
+
+			return nil
+		})
+	}
+
+	_ = wg.Wait()
+
+	// always return nil
 	return wsResults, nil
 }
 

internal/tools/cron_task.go

@@ -17,13 +17,18 @@ package tools
 import (
 	"context"
 	"fmt"
-	"sync"
+	"os"
+	"os/signal"
+	"syscall"
+	"time"
 
+	"github.com/redis/go-redis/v9"
 	"github.com/robfig/cron/v3"
 
 	"github.com/OpenIMSDK/tools/log"
 
 	"github.com/openimsdk/open-im-server/v3/pkg/common/config"
+	"github.com/openimsdk/open-im-server/v3/pkg/common/db/cache"
 )
 
 func StartTask() error {
@@ -32,23 +37,75 @@ func StartTask() error {
 	if err != nil {
 		return err
 	}
-	msgTool.ConvertTools()
+
-	c := cron.New()
+	msgTool.convertTools()
-	var wg sync.WaitGroup
+
-	wg.Add(1)
+	rdb, err := cache.NewRedis()
+	if err != nil {
+		return err
+	}
+
+	// register cron tasks
+	var crontab = cron.New()
 	log.ZInfo(context.Background(), "start chatRecordsClearTime cron task", "cron config", config.Config.ChatRecordsClearTime)
-	_, err = c.AddFunc(config.Config.ChatRecordsClearTime, msgTool.AllConversationClearMsgAndFixSeq)
+	_, err = crontab.AddFunc(config.Config.ChatRecordsClearTime, cronWrapFunc(rdb, "cron_clear_msg_and_fix_seq", msgTool.AllConversationClearMsgAndFixSeq))
 	if err != nil {
 		log.ZError(context.Background(), "start allConversationClearMsgAndFixSeq cron failed", err)
 		panic(err)
 	}
+
 	log.ZInfo(context.Background(), "start msgDestruct cron task", "cron config", config.Config.MsgDestructTime)
-	_, err = c.AddFunc(config.Config.MsgDestructTime, msgTool.ConversationsDestructMsgs)
+	_, err = crontab.AddFunc(config.Config.MsgDestructTime, cronWrapFunc(rdb, "cron_conversations_destruct_msgs", msgTool.ConversationsDestructMsgs))
 	if err != nil {
 		log.ZError(context.Background(), "start conversationsDestructMsgs cron failed", err)
 		panic(err)
 	}
-	c.Start()
+
-	wg.Wait()
+	// start crontab
+	crontab.Start()
+
+	sigs := make(chan os.Signal, 1)
+	signal.Notify(sigs, syscall.SIGINT, syscall.SIGTERM, syscall.SIGQUIT)
+	<-sigs
+
+	// stop crontab, Wait for the running task to exit.
+	ctx := crontab.Stop()
+
+	select {
+	case <-ctx.Done():
+		// graceful exit
+
+	case <-time.After(15 * time.Second):
+		// forced exit on timeout
+	}
+
 	return nil
 }
+
+// netlock redis lock.
+func netlock(rdb redis.UniversalClient, key string, ttl time.Duration) bool {
+	value := "used"
+	ok, err := rdb.SetNX(context.Background(), key, value, ttl).Result() // nolint
+	if err != nil {
+		// when err is about redis server, return true.
+		return false
+	}
+
+	return ok
+}
+
+func cronWrapFunc(rdb redis.UniversalClient, key string, fn func()) func() {
+	enableCronLocker := config.Config.EnableCronLocker
+	return func() {
+		// if don't enable cron-locker, call fn directly.
+		if !enableCronLocker {
+			fn()
+			return
+		}
+
+		// when acquire redis lock, call fn().
+		if netlock(rdb, key, 5*time.Second) {
+			fn()
+		}
+	}
+}

internal/tools/cron_task_test.go

@@ -0,0 +1,82 @@
+package tools
+
+import (
+	"fmt"
+	"math/rand"
+	"sync"
+	"testing"
+	"time"
+
+	"github.com/redis/go-redis/v9"
+	"github.com/robfig/cron/v3"
+	"github.com/stretchr/testify/assert"
+
+	"github.com/openimsdk/open-im-server/v3/pkg/common/config"
+)
+
+func TestDisLock(t *testing.T) {
+	rdb := redis.NewClient(&redis.Options{})
+	defer rdb.Close()
+
+	assert.Equal(t, true, netlock(rdb, "cron-1", 1*time.Second))
+
+	// if exists, get false
+	assert.Equal(t, false, netlock(rdb, "cron-1", 1*time.Second))
+
+	time.Sleep(2 * time.Second)
+
+	// wait for key on timeout, get true
+	assert.Equal(t, true, netlock(rdb, "cron-1", 2*time.Second))
+
+	// set different key
+	assert.Equal(t, true, netlock(rdb, "cron-2", 2*time.Second))
+}
+
+func TestCronWrapFunc(t *testing.T) {
+	rdb := redis.NewClient(&redis.Options{})
+	defer rdb.Close()
+
+	once := sync.Once{}
+	done := make(chan struct{}, 1)
+	cb := func() {
+		once.Do(func() {
+			close(done)
+		})
+	}
+
+	start := time.Now()
+	key := fmt.Sprintf("cron-%v", rand.Int31())
+	crontab := cron.New(cron.WithSeconds())
+	crontab.AddFunc("*/1 * * * * *", cronWrapFunc(rdb, key, cb))
+	crontab.Start()
+	<-done
+
+	dur := time.Since(start)
+	assert.LessOrEqual(t, dur.Seconds(), float64(2*time.Second))
+	crontab.Stop()
+}
+
+func TestCronWrapFuncWithNetlock(t *testing.T) {
+	config.Config.EnableCronLocker = true
+	rdb := redis.NewClient(&redis.Options{})
+	defer rdb.Close()
+
+	done := make(chan string, 10)
+
+	crontab := cron.New(cron.WithSeconds())
+
+	key := fmt.Sprintf("cron-%v", rand.Int31())
+	crontab.AddFunc("*/1 * * * * *", cronWrapFunc(rdb, key, func() {
+		done <- "host1"
+	}))
+	crontab.AddFunc("*/1 * * * * *", cronWrapFunc(rdb, key, func() {
+		done <- "host2"
+	}))
+	crontab.Start()
+
+	time.Sleep(12 * time.Second)
+	// the ttl of netlock is 5s, so expected value is 2.
+	assert.Equal(t, len(done), 2)
+
+	crontab.Stop()
+}

internal/tools/msg_doc_convert.go

@@ -22,7 +22,7 @@ import (
 	"github.com/openimsdk/open-im-server/v3/pkg/msgprocessor"
 )
 
-func (c *MsgTool) ConvertTools() {
+func (c *MsgTool) convertTools() {
 	ctx := mcontext.NewCtx("convert")
 	conversationIDs, err := c.conversationDatabase.GetAllConversationIDs(ctx)
 	if err != nil {

pkg/apistruct/manage.go

@@ -22,37 +22,37 @@ import (
 type SendMsg struct {
 	// SendID uniquely identifies the sender.
 	SendID string `json:"sendID" binding:"required"`
-	
+
 	// GroupID is the identifier for the group, required if SessionType is 2 or 3.
 	GroupID string `json:"groupID" binding:"required_if=SessionType 2|required_if=SessionType 3"`
-	
+
 	// SenderNickname is the nickname of the sender.
 	SenderNickname string `json:"senderNickname"`
-	
+
 	// SenderFaceURL is the URL to the sender's avatar.
 	SenderFaceURL string `json:"senderFaceURL"`
-	
+
 	// SenderPlatformID is an integer identifier for the sender's platform.
 	SenderPlatformID int32 `json:"senderPlatformID"`
-	
+
 	// Content is the actual content of the message, required and excluded from Swagger documentation.
 	Content map[string]interface{} `json:"content" binding:"required" swaggerignore:"true"`
-	
+
 	// ContentType is an integer that represents the type of the content.
 	ContentType int32 `json:"contentType" binding:"required"`
-	
+
 	// SessionType is an integer that represents the type of session for the message.
 	SessionType int32 `json:"sessionType" binding:"required"`
-	
+
 	// IsOnlineOnly specifies if the message is only sent when the receiver is online.
 	IsOnlineOnly bool `json:"isOnlineOnly"`
-	
+
 	// NotOfflinePush specifies if the message should not trigger offline push notifications.
 	NotOfflinePush bool `json:"notOfflinePush"`
-	
+
 	// SendTime is a timestamp indicating when the message was sent.
 	SendTime int64 `json:"sendTime"`
-	
+
 	// OfflinePushInfo contains information for offline push notifications.
 	OfflinePushInfo *sdkws.OfflinePushInfo `json:"offlinePushInfo"`
 }
@@ -67,10 +67,10 @@ type SendMsgReq struct {
 // BatchSendMsgReq defines the structure for sending a message to multiple recipients.
 type BatchSendMsgReq struct {
 	SendMsg
-	
+
 	// IsSendAll indicates whether the message should be sent to all users.
 	IsSendAll bool `json:"isSendAll"`
-	
+
 	// RecvIDs is a slice of receiver identifiers to whom the message will be sent, required field.
 	RecvIDs []string `json:"recvIDs" binding:"required"`
 }
@@ -79,7 +79,7 @@ type BatchSendMsgReq struct {
 type BatchSendMsgResp struct {
 	// Results is a slice of SingleReturnResult, representing the outcome of each message sent.
 	Results []*SingleReturnResult `json:"results"`
-	
+
 	// FailedIDs is a slice of user IDs for whom the message send failed.
 	FailedIDs []string `json:"failedUserIDs"`
 }
@@ -88,13 +88,13 @@ type BatchSendMsgResp struct {
 type SingleReturnResult struct {
 	// ServerMsgID is the message identifier on the server-side.
 	ServerMsgID string `json:"serverMsgID"`
-	
+
 	// ClientMsgID is the message identifier on the client-side.
 	ClientMsgID string `json:"clientMsgID"`
-	
+
 	// SendTime is the timestamp of when the message was sent.
 	SendTime int64 `json:"sendTime"`
-	
+
 	// RecvID uniquely identifies the receiver of the message.
 	RecvID string `json:"recvID"`
 }

pkg/common/cmd/msg_transfer.go

@@ -16,10 +16,12 @@ package cmd
 
 import (
 	"fmt"
+
 	"github.com/OpenIMSDK/protocol/constant"
-	config2 "github.com/openimsdk/open-im-server/v3/pkg/common/config"
 	"github.com/spf13/cobra"
 
+	config2 "github.com/openimsdk/open-im-server/v3/pkg/common/config"
+
 	"github.com/openimsdk/open-im-server/v3/internal/msgtransfer"
 )
 

pkg/common/config/config.go

@@ -78,17 +78,20 @@ type configStruct struct {
 	} `yaml:"mongo"`
 
 	Redis struct {
-		ClusterMode bool     `yaml:"clusterMode"`
+		ClusterMode    bool     `yaml:"clusterMode"`
-		Address     []string `yaml:"address"`
+		Address        []string `yaml:"address"`
-		Username    string   `yaml:"username"`
+		Username       string   `yaml:"username"`
-		Password    string   `yaml:"password"`
+		Password       string   `yaml:"password"`
+		EnablePipeline bool     `yaml:"enablePipeline"`
 	} `yaml:"redis"`
 
 	Kafka struct {
-		Username string   `yaml:"username"`
+		Username     string   `yaml:"username"`
-		Password string   `yaml:"password"`
+		Password     string   `yaml:"password"`
-		Addr     []string `yaml:"addr"`
+		ProducerAck  string   `yaml:"producerAck"`
-		TLS      *struct {
+		CompressType string   `yaml:"compressType"`
+		Addr         []string `yaml:"addr"`
+		TLS          *struct {
 			CACrt              string `yaml:"caCrt"`
 			ClientCrt          string `yaml:"clientCrt"`
 			ClientKey          string `yaml:"clientKey"`
@@ -193,11 +196,13 @@ type configStruct struct {
 		WebsocketMaxConnNum      int   `yaml:"websocketMaxConnNum"`
 		WebsocketMaxMsgLen       int   `yaml:"websocketMaxMsgLen"`
 		WebsocketTimeout         int   `yaml:"websocketTimeout"`
+		WebsocketWriteBufferSize int   `yaml:"websocketWriteBufferSize"`
 	} `yaml:"longConnSvr"`
 
 	Push struct {
-		Enable string `yaml:"enable"`
+		MaxConcurrentWorkers int    `yaml:"maxConcurrentWorkers"`
-		GeTui  struct {
+		Enable               string `yaml:"enable"`
+		GeTui                struct {
 			PushUrl      string `yaml:"pushUrl"`
 			AppKey       string `yaml:"appKey"`
 			Intent       string `yaml:"intent"`
@@ -229,6 +234,7 @@ type configStruct struct {
 	ChatRecordsClearTime              string `yaml:"chatRecordsClearTime"`
 	MsgDestructTime                   string `yaml:"msgDestructTime"`
 	Secret                            string `yaml:"secret"`
+	EnableCronLocker                  bool   `yaml:"enableCronLocker"`
 	TokenPolicy                       struct {
 		Expire int64 `yaml:"expire"`
 	} `yaml:"tokenPolicy"`

pkg/common/db/cache/init_redis.go

@@ -28,12 +28,21 @@ import (
 	"github.com/openimsdk/open-im-server/v3/pkg/common/config"
 )
 
+var (
+	// singleton pattern.
+	redisClient redis.UniversalClient
+)
+
 const (
 	maxRetry = 10 // number of retries
 )
 
 // NewRedis Initialize redis connection.
 func NewRedis() (redis.UniversalClient, error) {
+	if redisClient != nil {
+		return redisClient, nil
+	}
+
 	if len(config.Config.Redis.Address) == 0 {
 		return nil, errors.New("redis address is empty")
 	}
@@ -66,5 +75,6 @@ func NewRedis() (redis.UniversalClient, error) {
 		return nil, fmt.Errorf("redis ping %w", err)
 	}
 
+	redisClient = rdb
 	return rdb, err
 }

pkg/common/db/cache/msg.go

@@ -20,9 +20,7 @@ import (
 	"strconv"
 	"time"
 
-	"github.com/dtm-labs/rockscache"
+	"golang.org/x/sync/errgroup"
-
-	unrelationtb "github.com/openimsdk/open-im-server/v3/pkg/common/db/table/unrelation"
 
 	"github.com/openimsdk/open-im-server/v3/pkg/msgprocessor"
 
@@ -62,6 +60,8 @@ const (
 	uidPidToken             = "UID_PID_TOKEN_STATUS:"
 )
 
+var concurrentLimit = 3
+
 type SeqCache interface {
 	SetMaxSeq(ctx context.Context, conversationID string, maxSeq int64) error
 	GetMaxSeqs(ctx context.Context, conversationIDs []string) (map[string]int64, error)
@@ -133,10 +133,7 @@ func NewMsgCacheModel(client redis.UniversalClient) MsgModel {
 
 type msgCache struct {
 	metaCache
-	rdb            redis.UniversalClient
+	rdb redis.UniversalClient
-	expireTime     time.Duration
-	rcClient       *rockscache.Client
-	msgDocDatabase unrelationtb.MsgDocModelInterface
 }
 
 func (c *msgCache) getMaxSeqKey(conversationID string) string {
@@ -173,29 +170,6 @@ func (c *msgCache) getSeqs(ctx context.Context, items []string, getkey func(s st
 	}
 
 	return m, nil
-
-	//pipe := c.rdb.Pipeline()
-	//for _, v := range items {
-	//	if err := pipe.Get(ctx, getkey(v)).Err(); err != nil && err != redis.Nil {
-	//		return nil, errs.Wrap(err)
-	//	}
-	//}
-	//result, err := pipe.Exec(ctx)
-	//if err != nil && err != redis.Nil {
-	//	return nil, errs.Wrap(err)
-	//}
-	//m = make(map[string]int64, len(items))
-	//for i, v := range result {
-	//	seq := v.(*redis.StringCmd)
-	//	if seq.Err() != nil && seq.Err() != redis.Nil {
-	//		return nil, errs.Wrap(v.Err())
-	//	}
-	//	val := utils.StringToInt64(seq.Val())
-	//	if val != 0 {
-	//		m[items[i]] = val
-	//	}
-	//}
-	//return m, nil
 }
 
 func (c *msgCache) SetMaxSeq(ctx context.Context, conversationID string, maxSeq int64) error {
@@ -221,15 +195,6 @@ func (c *msgCache) setSeqs(ctx context.Context, seqs map[string]int64, getkey fu
 		}
 	}
 	return nil
-	//pipe := c.rdb.Pipeline()
-	//for k, seq := range seqs {
-	//	err := pipe.Set(ctx, getkey(k), seq, 0).Err()
-	//	if err != nil {
-	//		return errs.Wrap(err)
-	//	}
-	//}
-	//_, err := pipe.Exec(ctx)
-	//return err
 }
 
 func (c *msgCache) SetMinSeqs(ctx context.Context, seqs map[string]int64) error {
@@ -345,85 +310,165 @@ func (c *msgCache) allMessageCacheKey(conversationID string) string {
 }
 
 func (c *msgCache) GetMessagesBySeq(ctx context.Context, conversationID string, seqs []int64) (seqMsgs []*sdkws.MsgData, failedSeqs []int64, err error) {
+	if config.Config.Redis.EnablePipeline {
+		return c.PipeGetMessagesBySeq(ctx, conversationID, seqs)
+	}
+
+	return c.ParallelGetMessagesBySeq(ctx, conversationID, seqs)
+}
+
+func (c *msgCache) PipeGetMessagesBySeq(ctx context.Context, conversationID string, seqs []int64) (seqMsgs []*sdkws.MsgData, failedSeqs []int64, err error) {
+	pipe := c.rdb.Pipeline()
+
+	results := []*redis.StringCmd{}
 	for _, seq := range seqs {
-		res, err := c.rdb.Get(ctx, c.getMessageCacheKey(conversationID, seq)).Result()
+		results = append(results, pipe.Get(ctx, c.getMessageCacheKey(conversationID, seq)))
-		if err != nil {
+	}
-			log.ZError(ctx, "GetMessagesBySeq failed", err, "conversationID", conversationID, "seq", seq)
+
+	_, err = pipe.Exec(ctx)
+	if err != nil && err != redis.Nil {
+		return seqMsgs, failedSeqs, errs.Wrap(err, "pipe.get")
+	}
+
+	for idx, res := range results {
+		seq := seqs[idx]
+		if res.Err() != nil {
+			log.ZError(ctx, "GetMessagesBySeq failed", err, "conversationID", conversationID, "seq", seq, "err", res.Err())
 			failedSeqs = append(failedSeqs, seq)
 			continue
 		}
+
 		msg := sdkws.MsgData{}
-		if err = msgprocessor.String2Pb(res, &msg); err != nil {
+		if err = msgprocessor.String2Pb(res.Val(), &msg); err != nil {
 			log.ZError(ctx, "GetMessagesBySeq Unmarshal failed", err, "res", res, "conversationID", conversationID, "seq", seq)
 			failedSeqs = append(failedSeqs, seq)
 			continue
 		}
+
 		if msg.Status == constant.MsgDeleted {
 			failedSeqs = append(failedSeqs, seq)
 			continue
 		}
+
 		seqMsgs = append(seqMsgs, &msg)
 	}
 
 	return
-	//pipe := c.rdb.Pipeline()
+}
-	//for _, v := range seqs {
+
-	//	// MESSAGE_CACHE:169.254.225.224_reliability1653387820_0_1
+func (c *msgCache) ParallelGetMessagesBySeq(ctx context.Context, conversationID string, seqs []int64) (seqMsgs []*sdkws.MsgData, failedSeqs []int64, err error) {
-	//	key := c.getMessageCacheKey(conversationID, v)
+	type entry struct {
-	//	if err := pipe.Get(ctx, key).Err(); err != nil && err != redis.Nil {
+		err error
-	//		return nil, nil, err
+		msg *sdkws.MsgData
-	//	}
+	}
-	//}
+
-	//result, err := pipe.Exec(ctx)
+	wg := errgroup.Group{}
-	//for i, v := range result {
+	wg.SetLimit(concurrentLimit)
-	//	cmd := v.(*redis.StringCmd)
+
-	//	if cmd.Err() != nil {
+	results := make([]entry, len(seqs)) // set slice len/cap to length of seqs.
-	//		failedSeqs = append(failedSeqs, seqs[i])
+	for idx, seq := range seqs {
-	//	} else {
+		// closure safe var
-	//		msg := sdkws.MsgData{}
+		idx := idx
-	//		err = msgprocessor.String2Pb(cmd.Val(), &msg)
+		seq := seq
-	//		if err == nil {
+
-	//			if msg.Status != constant.MsgDeleted {
+		wg.Go(func() error {
-	//				seqMsgs = append(seqMsgs, &msg)
+			res, err := c.rdb.Get(ctx, c.getMessageCacheKey(conversationID, seq)).Result()
-	//				continue
+			if err != nil {
-	//			}
+				log.ZError(ctx, "GetMessagesBySeq failed", err, "conversationID", conversationID, "seq", seq)
-	//		} else {
+				results[idx] = entry{err: err}
-	//			log.ZWarn(ctx, "UnmarshalString failed", err, "conversationID", conversationID, "seq", seqs[i], "msg", cmd.Val())
+				return nil
-	//		}
+			}
-	//		failedSeqs = append(failedSeqs, seqs[i])
+
-	//	}
+			msg := sdkws.MsgData{}
-	//}
+			if err = msgprocessor.String2Pb(res, &msg); err != nil {
-	//return seqMsgs, failedSeqs, err
+				log.ZError(ctx, "GetMessagesBySeq Unmarshal failed", err, "res", res, "conversationID", conversationID, "seq", seq)
+				results[idx] = entry{err: err}
+				return nil
+			}
+
+			if msg.Status == constant.MsgDeleted {
+				results[idx] = entry{err: err}
+				return nil
+			}
+
+			results[idx] = entry{msg: &msg}
+			return nil
+		})
+	}
+
+	_ = wg.Wait()
+
+	for idx, res := range results {
+		if res.err != nil {
+			failedSeqs = append(failedSeqs, seqs[idx])
+			continue
+		}
+
+		seqMsgs = append(seqMsgs, res.msg)
+	}
+
+	return
 }
 
 func (c *msgCache) SetMessageToCache(ctx context.Context, conversationID string, msgs []*sdkws.MsgData) (int, error) {
+	if config.Config.Redis.EnablePipeline {
+		return c.PipeSetMessageToCache(ctx, conversationID, msgs)
+	}
+	return c.ParallelSetMessageToCache(ctx, conversationID, msgs)
+}
+
+func (c *msgCache) PipeSetMessageToCache(ctx context.Context, conversationID string, msgs []*sdkws.MsgData) (int, error) {
+	pipe := c.rdb.Pipeline()
 	for _, msg := range msgs {
 		s, err := msgprocessor.Pb2String(msg)
 		if err != nil {
-			return 0, errs.Wrap(err)
+			return 0, errs.Wrap(err, "pb.marshal")
 		}
+
 		key := c.getMessageCacheKey(conversationID, msg.Seq)
-		if err := c.rdb.Set(ctx, key, s, time.Duration(config.Config.MsgCacheTimeout)*time.Second).Err(); err != nil {
+		_ = pipe.Set(ctx, key, s, time.Duration(config.Config.MsgCacheTimeout)*time.Second)
+	}
+
+	results, err := pipe.Exec(ctx)
+	if err != nil {
+		return 0, errs.Wrap(err, "pipe.set")
+	}
+
+	for _, res := range results {
+		if res.Err() != nil {
 			return 0, errs.Wrap(err)
 		}
 	}
+
+	return len(msgs), nil
+}
+
+func (c *msgCache) ParallelSetMessageToCache(ctx context.Context, conversationID string, msgs []*sdkws.MsgData) (int, error) {
+	wg := errgroup.Group{}
+	wg.SetLimit(concurrentLimit)
+
+	for _, msg := range msgs {
+		msg := msg // closure safe var
+		wg.Go(func() error {
+			s, err := msgprocessor.Pb2String(msg)
+			if err != nil {
+				return errs.Wrap(err)
+			}
+
+			key := c.getMessageCacheKey(conversationID, msg.Seq)
+			if err := c.rdb.Set(ctx, key, s, time.Duration(config.Config.MsgCacheTimeout)*time.Second).Err(); err != nil {
+				return errs.Wrap(err)
+			}
+			return nil
+		})
+	}
+
+	err := wg.Wait()
+	if err != nil {
+		return 0, err
+	}
+
 	return len(msgs), nil
-	//pipe := c.rdb.Pipeline()
-	//var failedMsgs []*sdkws.MsgData
-	//for _, msg := range msgs {
-	//	key := c.getMessageCacheKey(conversationID, msg.Seq)
-	//	s, err := msgprocessor.Pb2String(msg)
-	//	if err != nil {
-	//		return 0, errs.Wrap(err)
-	//	}
-	//	err = pipe.Set(ctx, key, s, time.Duration(config.Config.MsgCacheTimeout)*time.Second).Err()
-	//	if err != nil {
-	//		failedMsgs = append(failedMsgs, msg)
-	//		log.ZWarn(ctx, "set msg 2 cache failed", err, "msg", failedMsgs)
-	//	}
-	//}
-	//_, err := pipe.Exec(ctx)
-	//return len(failedMsgs), err
 }
 
 func (c *msgCache) getMessageDelUserListKey(conversationID string, seq int64) string {
@@ -554,20 +599,49 @@ func (c *msgCache) DelUserDeleteMsgsList(ctx context.Context, conversationID str
 }
 
 func (c *msgCache) DeleteMessages(ctx context.Context, conversationID string, seqs []int64) error {
+	if config.Config.Redis.EnablePipeline {
+		return c.PipeDeleteMessages(ctx, conversationID, seqs)
+	}
+
+	return c.ParallelDeleteMessages(ctx, conversationID, seqs)
+}
+
+func (c *msgCache) ParallelDeleteMessages(ctx context.Context, conversationID string, seqs []int64) error {
+	wg := errgroup.Group{}
+	wg.SetLimit(concurrentLimit)
+
 	for _, seq := range seqs {
-		if err := c.rdb.Del(ctx, c.getMessageCacheKey(conversationID, seq)).Err(); err != nil {
+		seq := seq
+		wg.Go(func() error {
+			err := c.rdb.Del(ctx, c.getMessageCacheKey(conversationID, seq)).Err()
+			if err != nil {
+				return errs.Wrap(err)
+			}
+			return nil
+		})
+	}
+
+	return wg.Wait()
+}
+
+func (c *msgCache) PipeDeleteMessages(ctx context.Context, conversationID string, seqs []int64) error {
+	pipe := c.rdb.Pipeline()
+	for _, seq := range seqs {
+		_ = pipe.Del(ctx, c.getMessageCacheKey(conversationID, seq))
+	}
+
+	results, err := pipe.Exec(ctx)
+	if err != nil {
+		return errs.Wrap(err, "pipe.del")
+	}
+
+	for _, res := range results {
+		if res.Err() != nil {
 			return errs.Wrap(err)
 		}
 	}
+
 	return nil
-	//pipe := c.rdb.Pipeline()
-	//for _, seq := range seqs {
-	//	if err := pipe.Del(ctx, c.getMessageCacheKey(conversationID, seq)).Err(); err != nil {
-	//		return errs.Wrap(err)
-	//	}
-	//}
-	//_, err := pipe.Exec(ctx)
-	//return errs.Wrap(err)
 }
 
 func (c *msgCache) CleanUpOneConversationAllMsg(ctx context.Context, conversationID string) error {
@@ -584,14 +658,6 @@ func (c *msgCache) CleanUpOneConversationAllMsg(ctx context.Context, conversatio
 		}
 	}
 	return nil
-	//pipe := c.rdb.Pipeline()
-	//for _, v := range vals {
-	//	if err := pipe.Del(ctx, v).Err(); err != nil {
-	//		return errs.Wrap(err)
-	//	}
-	//}
-	//_, err = pipe.Exec(ctx)
-	//return errs.Wrap(err)
 }
 
 func (c *msgCache) DelMsgFromCache(ctx context.Context, userID string, seqs []int64) error {

pkg/common/db/cache/msg_test.go

@@ -0,0 +1,387 @@
+package cache
+
+import (
+	"context"
+	"fmt"
+	"math/rand"
+	"testing"
+
+	"github.com/OpenIMSDK/protocol/sdkws"
+	"github.com/redis/go-redis/v9"
+	"github.com/stretchr/testify/assert"
+)
+
+func TestParallelSetMessageToCache(t *testing.T) {
+	var (
+		cid      = fmt.Sprintf("cid-%v", rand.Int63())
+		seqFirst = rand.Int63()
+		msgs     = []*sdkws.MsgData{}
+	)
+
+	for i := 0; i < 100; i++ {
+		msgs = append(msgs, &sdkws.MsgData{
+			Seq: seqFirst + int64(i),
+		})
+	}
+
+	testParallelSetMessageToCache(t, cid, msgs)
+}
+
+func testParallelSetMessageToCache(t *testing.T, cid string, msgs []*sdkws.MsgData) {
+	rdb := redis.NewClient(&redis.Options{})
+	defer rdb.Close()
+
+	cacher := msgCache{rdb: rdb}
+
+	ret, err := cacher.ParallelSetMessageToCache(context.Background(), cid, msgs)
+	assert.Nil(t, err)
+	assert.Equal(t, len(msgs), ret)
+
+	// validate
+	for _, msg := range msgs {
+		key := cacher.getMessageCacheKey(cid, msg.Seq)
+		val, err := rdb.Exists(context.Background(), key).Result()
+		assert.Nil(t, err)
+		assert.EqualValues(t, 1, val)
+	}
+}
+
+func TestPipeSetMessageToCache(t *testing.T) {
+	var (
+		cid      = fmt.Sprintf("cid-%v", rand.Int63())
+		seqFirst = rand.Int63()
+		msgs     = []*sdkws.MsgData{}
+	)
+
+	for i := 0; i < 100; i++ {
+		msgs = append(msgs, &sdkws.MsgData{
+			Seq: seqFirst + int64(i),
+		})
+	}
+
+	testPipeSetMessageToCache(t, cid, msgs)
+}
+
+func testPipeSetMessageToCache(t *testing.T, cid string, msgs []*sdkws.MsgData) {
+	rdb := redis.NewClient(&redis.Options{})
+	defer rdb.Close()
+
+	cacher := msgCache{rdb: rdb}
+
+	ret, err := cacher.PipeSetMessageToCache(context.Background(), cid, msgs)
+	assert.Nil(t, err)
+	assert.Equal(t, len(msgs), ret)
+
+	// validate
+	for _, msg := range msgs {
+		key := cacher.getMessageCacheKey(cid, msg.Seq)
+		val, err := rdb.Exists(context.Background(), key).Result()
+		assert.Nil(t, err)
+		assert.EqualValues(t, 1, val)
+	}
+}
+
+func TestGetMessagesBySeq(t *testing.T) {
+	var (
+		cid      = fmt.Sprintf("cid-%v", rand.Int63())
+		seqFirst = rand.Int63()
+		msgs     = []*sdkws.MsgData{}
+	)
+
+	seqs := []int64{}
+	for i := 0; i < 100; i++ {
+		msgs = append(msgs, &sdkws.MsgData{
+			Seq:    seqFirst + int64(i),
+			SendID: fmt.Sprintf("fake-sendid-%v", i),
+		})
+		seqs = append(seqs, seqFirst+int64(i))
+	}
+
+	// set data to cache
+	testPipeSetMessageToCache(t, cid, msgs)
+
+	// get data from cache with parallet mode
+	testParallelGetMessagesBySeq(t, cid, seqs, msgs)
+
+	// get data from cache with pipeline mode
+	testPipeGetMessagesBySeq(t, cid, seqs, msgs)
+}
+
+func testParallelGetMessagesBySeq(t *testing.T, cid string, seqs []int64, inputMsgs []*sdkws.MsgData) {
+	rdb := redis.NewClient(&redis.Options{})
+	defer rdb.Close()
+
+	cacher := msgCache{rdb: rdb}
+
+	respMsgs, failedSeqs, err := cacher.ParallelGetMessagesBySeq(context.Background(), cid, seqs)
+	assert.Nil(t, err)
+	assert.Equal(t, 0, len(failedSeqs))
+	assert.Equal(t, len(respMsgs), len(seqs))
+
+	// validate
+	for idx, msg := range respMsgs {
+		assert.Equal(t, msg.Seq, inputMsgs[idx].Seq)
+		assert.Equal(t, msg.SendID, inputMsgs[idx].SendID)
+	}
+}
+
+func testPipeGetMessagesBySeq(t *testing.T, cid string, seqs []int64, inputMsgs []*sdkws.MsgData) {
+	rdb := redis.NewClient(&redis.Options{})
+	defer rdb.Close()
+
+	cacher := msgCache{rdb: rdb}
+
+	respMsgs, failedSeqs, err := cacher.PipeGetMessagesBySeq(context.Background(), cid, seqs)
+	assert.Nil(t, err)
+	assert.Equal(t, 0, len(failedSeqs))
+	assert.Equal(t, len(respMsgs), len(seqs))
+
+	// validate
+	for idx, msg := range respMsgs {
+		assert.Equal(t, msg.Seq, inputMsgs[idx].Seq)
+		assert.Equal(t, msg.SendID, inputMsgs[idx].SendID)
+	}
+}
+
+func TestGetMessagesBySeqWithEmptySeqs(t *testing.T) {
+	var (
+		cid            = fmt.Sprintf("cid-%v", rand.Int63())
+		seqFirst int64 = 0
+		msgs           = []*sdkws.MsgData{}
+	)
+
+	seqs := []int64{}
+	for i := 0; i < 100; i++ {
+		msgs = append(msgs, &sdkws.MsgData{
+			Seq:    seqFirst + int64(i),
+			SendID: fmt.Sprintf("fake-sendid-%v", i),
+		})
+		seqs = append(seqs, seqFirst+int64(i))
+	}
+
+	// don't set cache, only get data from cache.
+
+	// get data from cache with parallet mode
+	testParallelGetMessagesBySeqWithEmptry(t, cid, seqs, msgs)
+
+	// get data from cache with pipeline mode
+	testPipeGetMessagesBySeqWithEmptry(t, cid, seqs, msgs)
+}
+
+func testParallelGetMessagesBySeqWithEmptry(t *testing.T, cid string, seqs []int64, inputMsgs []*sdkws.MsgData) {
+	rdb := redis.NewClient(&redis.Options{})
+	defer rdb.Close()
+
+	cacher := msgCache{rdb: rdb}
+
+	respMsgs, failedSeqs, err := cacher.ParallelGetMessagesBySeq(context.Background(), cid, seqs)
+	assert.Nil(t, err)
+	assert.Equal(t, len(seqs), len(failedSeqs))
+	assert.Equal(t, 0, len(respMsgs))
+}
+
+func testPipeGetMessagesBySeqWithEmptry(t *testing.T, cid string, seqs []int64, inputMsgs []*sdkws.MsgData) {
+	rdb := redis.NewClient(&redis.Options{})
+	defer rdb.Close()
+
+	cacher := msgCache{rdb: rdb}
+
+	respMsgs, failedSeqs, err := cacher.PipeGetMessagesBySeq(context.Background(), cid, seqs)
+	assert.Equal(t, err, redis.Nil)
+	assert.Equal(t, len(seqs), len(failedSeqs))
+	assert.Equal(t, 0, len(respMsgs))
+}
+
+func TestGetMessagesBySeqWithLostHalfSeqs(t *testing.T) {
+	var (
+		cid            = fmt.Sprintf("cid-%v", rand.Int63())
+		seqFirst int64 = 0
+		msgs           = []*sdkws.MsgData{}
+	)
+
+	seqs := []int64{}
+	for i := 0; i < 100; i++ {
+		msgs = append(msgs, &sdkws.MsgData{
+			Seq:    seqFirst + int64(i),
+			SendID: fmt.Sprintf("fake-sendid-%v", i),
+		})
+		seqs = append(seqs, seqFirst+int64(i))
+	}
+
+	// Only set half the number of messages.
+	testParallelSetMessageToCache(t, cid, msgs[:50])
+
+	// get data from cache with parallet mode
+	testParallelGetMessagesBySeqWithLostHalfSeqs(t, cid, seqs, msgs)
+
+	// get data from cache with pipeline mode
+	testPipeGetMessagesBySeqWithLostHalfSeqs(t, cid, seqs, msgs)
+}
+
+func testParallelGetMessagesBySeqWithLostHalfSeqs(t *testing.T, cid string, seqs []int64, inputMsgs []*sdkws.MsgData) {
+	rdb := redis.NewClient(&redis.Options{})
+	defer rdb.Close()
+
+	cacher := msgCache{rdb: rdb}
+
+	respMsgs, failedSeqs, err := cacher.ParallelGetMessagesBySeq(context.Background(), cid, seqs)
+	assert.Nil(t, err)
+	assert.Equal(t, len(seqs)/2, len(failedSeqs))
+	assert.Equal(t, len(seqs)/2, len(respMsgs))
+
+	for idx, msg := range respMsgs {
+		assert.Equal(t, msg.Seq, seqs[idx])
+	}
+}
+
+func testPipeGetMessagesBySeqWithLostHalfSeqs(t *testing.T, cid string, seqs []int64, inputMsgs []*sdkws.MsgData) {
+	rdb := redis.NewClient(&redis.Options{})
+	defer rdb.Close()
+
+	cacher := msgCache{rdb: rdb}
+
+	respMsgs, failedSeqs, err := cacher.PipeGetMessagesBySeq(context.Background(), cid, seqs)
+	assert.Nil(t, err)
+	assert.Equal(t, len(seqs)/2, len(failedSeqs))
+	assert.Equal(t, len(seqs)/2, len(respMsgs))
+
+	for idx, msg := range respMsgs {
+		assert.Equal(t, msg.Seq, seqs[idx])
+	}
+}
+
+func TestPipeDeleteMessages(t *testing.T) {
+	var (
+		cid      = fmt.Sprintf("cid-%v", rand.Int63())
+		seqFirst = rand.Int63()
+		msgs     = []*sdkws.MsgData{}
+	)
+
+	var seqs []int64
+	for i := 0; i < 100; i++ {
+		msgs = append(msgs, &sdkws.MsgData{
+			Seq: seqFirst + int64(i),
+		})
+		seqs = append(seqs, msgs[i].Seq)
+	}
+
+	testPipeSetMessageToCache(t, cid, msgs)
+	testPipeDeleteMessagesOK(t, cid, seqs, msgs)
+
+	// set again
+	testPipeSetMessageToCache(t, cid, msgs)
+	testPipeDeleteMessagesMix(t, cid, seqs[:90], msgs)
+}
+
+func testPipeDeleteMessagesOK(t *testing.T, cid string, seqs []int64, inputMsgs []*sdkws.MsgData) {
+	rdb := redis.NewClient(&redis.Options{})
+	defer rdb.Close()
+
+	cacher := msgCache{rdb: rdb}
+
+	err := cacher.PipeDeleteMessages(context.Background(), cid, seqs)
+	assert.Nil(t, err)
+
+	// validate
+	for _, msg := range inputMsgs {
+		key := cacher.getMessageCacheKey(cid, msg.Seq)
+		val := rdb.Exists(context.Background(), key).Val()
+		assert.EqualValues(t, 0, val)
+	}
+}
+
+func testPipeDeleteMessagesMix(t *testing.T, cid string, seqs []int64, inputMsgs []*sdkws.MsgData) {
+	rdb := redis.NewClient(&redis.Options{})
+	defer rdb.Close()
+
+	cacher := msgCache{rdb: rdb}
+
+	err := cacher.PipeDeleteMessages(context.Background(), cid, seqs)
+	assert.Nil(t, err)
+
+	// validate
+	for idx, msg := range inputMsgs {
+		key := cacher.getMessageCacheKey(cid, msg.Seq)
+		val, err := rdb.Exists(context.Background(), key).Result()
+		assert.Nil(t, err)
+		if idx < 90 {
+			assert.EqualValues(t, 0, val) // not exists
+			continue
+		}
+
+		assert.EqualValues(t, 1, val) // exists
+	}
+}
+
+func TestParallelDeleteMessages(t *testing.T) {
+	var (
+		cid      = fmt.Sprintf("cid-%v", rand.Int63())
+		seqFirst = rand.Int63()
+		msgs     = []*sdkws.MsgData{}
+	)
+
+	var seqs []int64
+	for i := 0; i < 100; i++ {
+		msgs = append(msgs, &sdkws.MsgData{
+			Seq: seqFirst + int64(i),
+		})
+		seqs = append(seqs, msgs[i].Seq)
+	}
+
+	randSeqs := []int64{}
+	for i := seqFirst + 100; i < seqFirst+200; i++ {
+		randSeqs = append(randSeqs, i)
+	}
+
+	testParallelSetMessageToCache(t, cid, msgs)
+	testParallelDeleteMessagesOK(t, cid, seqs, msgs)
+
+	// set again
+	testParallelSetMessageToCache(t, cid, msgs)
+	testParallelDeleteMessagesMix(t, cid, seqs[:90], msgs, 90)
+	testParallelDeleteMessagesOK(t, cid, seqs[90:], msgs[:90])
+
+	// set again
+	testParallelSetMessageToCache(t, cid, msgs)
+	testParallelDeleteMessagesMix(t, cid, randSeqs, msgs, 0)
+}
+
+func testParallelDeleteMessagesOK(t *testing.T, cid string, seqs []int64, inputMsgs []*sdkws.MsgData) {
+	rdb := redis.NewClient(&redis.Options{})
+	defer rdb.Close()
+
+	cacher := msgCache{rdb: rdb}
+
+	err := cacher.PipeDeleteMessages(context.Background(), cid, seqs)
+	assert.Nil(t, err)
+
+	// validate
+	for _, msg := range inputMsgs {
+		key := cacher.getMessageCacheKey(cid, msg.Seq)
+		val := rdb.Exists(context.Background(), key).Val()
+		assert.EqualValues(t, 0, val)
+	}
+}
+
+func testParallelDeleteMessagesMix(t *testing.T, cid string, seqs []int64, inputMsgs []*sdkws.MsgData, lessValNonExists int) {
+	rdb := redis.NewClient(&redis.Options{})
+	defer rdb.Close()
+
+	cacher := msgCache{rdb: rdb}
+
+	err := cacher.PipeDeleteMessages(context.Background(), cid, seqs)
+	assert.Nil(t, err)
+
+	// validate
+	for idx, msg := range inputMsgs {
+		key := cacher.getMessageCacheKey(cid, msg.Seq)
+		val, err := rdb.Exists(context.Background(), key).Result()
+		assert.Nil(t, err)
+		if idx < lessValNonExists {
+			assert.EqualValues(t, 0, val) // not exists
+			continue
+		}
+
+		assert.EqualValues(t, 1, val) // exists
+	}
+}

pkg/common/db/controller/msg.go

@@ -16,22 +16,27 @@ package controller
 
 import (
 	"context"
+	"encoding/json"
 	"errors"
 	"time"
 
+	"github.com/OpenIMSDK/protocol/constant"
+
+	"github.com/openimsdk/open-im-server/v3/pkg/common/prommetrics"
+
 	"github.com/redis/go-redis/v9"
 
 	"github.com/OpenIMSDK/tools/errs"
 	"github.com/OpenIMSDK/tools/log"
 
+	"go.mongodb.org/mongo-driver/mongo"
+
 	"github.com/openimsdk/open-im-server/v3/pkg/common/config"
 	"github.com/openimsdk/open-im-server/v3/pkg/common/convert"
 	"github.com/openimsdk/open-im-server/v3/pkg/common/db/cache"
 	unrelationtb "github.com/openimsdk/open-im-server/v3/pkg/common/db/table/unrelation"
 	"github.com/openimsdk/open-im-server/v3/pkg/common/db/unrelation"
 	"github.com/openimsdk/open-im-server/v3/pkg/common/kafka"
-	"github.com/openimsdk/open-im-server/v3/pkg/common/prommetrics"
-	"go.mongodb.org/mongo-driver/mongo"
 
 	pbmsg "github.com/OpenIMSDK/protocol/msg"
 	"github.com/OpenIMSDK/protocol/sdkws"
@@ -397,7 +402,7 @@ func (db *commonMsgDatabase) BatchInsertChat2Cache(ctx context.Context, conversa
 func (db *commonMsgDatabase) getMsgBySeqs(ctx context.Context, userID, conversationID string, seqs []int64) (totalMsgs []*sdkws.MsgData, err error) {
 	for docID, seqs := range db.msg.GetDocIDSeqsMap(conversationID, seqs) {
 		// log.ZDebug(ctx, "getMsgBySeqs", "docID", docID, "seqs", seqs)
-		msgs, err := db.findMsgInfoBySeq(ctx, userID, docID, seqs)
+		msgs, err := db.findMsgInfoBySeq(ctx, userID, docID, conversationID, seqs)
 		if err != nil {
 			return nil, err
 		}
@@ -408,13 +413,71 @@ func (db *commonMsgDatabase) getMsgBySeqs(ctx context.Context, userID, conversat
 	return totalMsgs, nil
 }
 
-func (db *commonMsgDatabase) findMsgInfoBySeq(ctx context.Context, userID, docID string, seqs []int64) (totalMsgs []*unrelationtb.MsgInfoModel, err error) {
+func (db *commonMsgDatabase) handlerDBMsg(ctx context.Context, cache map[int64][]*unrelationtb.MsgInfoModel, userID, conversationID string, msg *unrelationtb.MsgInfoModel) {
-	msgs, err := db.msgDocDatabase.GetMsgBySeqIndexIn1Doc(ctx, userID, docID, seqs)
+	if msg.IsRead {
-	for _, msg := range msgs {
+		msg.Msg.IsRead = true
-		if msg.IsRead {
+	}
-			msg.Msg.IsRead = true
+	if msg.Msg.ContentType != constant.Quote {
+		return
+	}
+	if msg.Msg.Content == "" {
+		return
+	}
+	var quoteMsg struct {
+		Text              string          `json:"text,omitempty"`
+		QuoteMessage      *sdkws.MsgData  `json:"quoteMessage,omitempty"`
+		MessageEntityList json.RawMessage `json:"messageEntityList,omitempty"`
+	}
+	if err := json.Unmarshal([]byte(msg.Msg.Content), &quoteMsg); err != nil {
+		log.ZError(ctx, "json.Unmarshal", err)
+		return
+	}
+	if quoteMsg.QuoteMessage == nil || quoteMsg.QuoteMessage.ContentType == constant.MsgRevokeNotification {
+		return
+	}
+	var msgs []*unrelationtb.MsgInfoModel
+	if v, ok := cache[quoteMsg.QuoteMessage.Seq]; ok {
+		msgs = v
+	} else {
+		if quoteMsg.QuoteMessage.Seq > 0 {
+			ms, err := db.msgDocDatabase.GetMsgBySeqIndexIn1Doc(ctx, userID, db.msg.GetDocID(conversationID, quoteMsg.QuoteMessage.Seq), []int64{quoteMsg.QuoteMessage.Seq})
+			if err != nil {
+				log.ZError(ctx, "GetMsgBySeqIndexIn1Doc", err, "conversationID", conversationID, "seq", quoteMsg.QuoteMessage.Seq)
+				return
+			}
+			msgs = ms
+			cache[quoteMsg.QuoteMessage.Seq] = ms
 		}
 	}
+	if len(msgs) != 0 && msgs[0].Msg.ContentType != constant.MsgRevokeNotification {
+		return
+	}
+	quoteMsg.QuoteMessage.ContentType = constant.MsgRevokeNotification
+	if len(msgs) > 0 {
+		quoteMsg.QuoteMessage.Content = []byte(msgs[0].Msg.Content)
+	} else {
+		quoteMsg.QuoteMessage.Content = []byte("{}")
+	}
+	data, err := json.Marshal(&quoteMsg)
+	if err != nil {
+		log.ZError(ctx, "json.Marshal", err)
+		return
+	}
+	msg.Msg.Content = string(data)
+	if _, err := db.msgDocDatabase.UpdateMsg(ctx, db.msg.GetDocID(conversationID, msg.Msg.Seq), db.msg.GetMsgIndex(msg.Msg.Seq), "msg", msg.Msg); err != nil {
+		log.ZError(ctx, "UpdateMsgContent", err)
+	}
+}
+
+func (db *commonMsgDatabase) findMsgInfoBySeq(ctx context.Context, userID, docID string, conversationID string, seqs []int64) (totalMsgs []*unrelationtb.MsgInfoModel, err error) {
+	msgs, err := db.msgDocDatabase.GetMsgBySeqIndexIn1Doc(ctx, userID, docID, seqs)
+	if err != nil {
+		return nil, err
+	}
+	tempCache := make(map[int64][]*unrelationtb.MsgInfoModel)
+	for _, msg := range msgs {
+		db.handlerDBMsg(ctx, tempCache, userID, conversationID, msg)
+	}
 	return msgs, err
 }
 
@@ -422,7 +485,7 @@ func (db *commonMsgDatabase) getMsgBySeqsRange(ctx context.Context, userID strin
 	log.ZDebug(ctx, "getMsgBySeqsRange", "conversationID", conversationID, "allSeqs", allSeqs, "begin", begin, "end", end)
 	for docID, seqs := range db.msg.GetDocIDSeqsMap(conversationID, allSeqs) {
 		log.ZDebug(ctx, "getMsgBySeqsRange", "docID", docID, "seqs", seqs)
-		msgs, err := db.findMsgInfoBySeq(ctx, userID, docID, seqs)
+		msgs, err := db.findMsgInfoBySeq(ctx, userID, docID, conversationID, seqs)
 		if err != nil {
 			return nil, err
 		}

pkg/common/db/controller/msg_test.go

@@ -144,9 +144,9 @@ func Test_BatchInsertChat2DB(t *testing.T) {
 }
 
 func GetDB() *commonMsgDatabase {
-	config.Config.Mongo.Address = []string{"192.168.44.128:37017"}
+	config.Config.Mongo.Address = []string{"203.56.175.233:37017"}
 	// config.Config.Mongo.Timeout = 60
-	config.Config.Mongo.Database = "openIM"
+	config.Config.Mongo.Database = "openIM_v3"
 	// config.Config.Mongo.Source = "admin"
 	config.Config.Mongo.Username = "root"
 	config.Config.Mongo.Password = "openIM123"
@@ -232,37 +232,17 @@ func Test_FindBySeq(t *testing.T) {
 //	}
 //}
 
-//func Test_Delete1(t *testing.T) {
+func TestName(t *testing.T) {
-//	config.Config.Mongo.DBAddress = []string{"192.168.44.128:37017"}
+	db := GetDB()
-//	config.Config.Mongo.DBTimeout = 60
+	var seqs []int64
-//	config.Config.Mongo.DBDatabase = "openIM"
+	for i := int64(1); i <= 4; i++ {
-//	config.Config.Mongo.DBSource = "admin"
+		seqs = append(seqs, i)
-//	config.Config.Mongo.DBUserName = "root"
+	}
-//	config.Config.Mongo.DBPassword = "openIM123"
+	msgs, err := db.getMsgBySeqsRange(context.Background(), "4931176757", "si_3866692501_4931176757", seqs, seqs[0], seqs[len(seqs)-1])
-//	config.Config.Mongo.DBMaxPoolSize = 100
+	if err != nil {
-//	config.Config.Mongo.DBRetainChatRecords = 3650
+		t.Fatal(err)
-//	config.Config.Mongo.ChatRecordsClearTime = "0 2 * * 3"
+	}
-//
+
-//	mongo, err := unrelation.NewMongo()
+	t.Log(msgs)
-//	if err != nil {
+
-//		panic(err)
+}
-//	}
-//	err = mongo.GetDatabase().Client().Ping(context.Background(), nil)
-//	if err != nil {
-//		panic(err)
-//	}
-//
-//	c := mongo.GetClient().Database("openIM").Collection("msg")
-//
-//	var o unrelationtb.MsgDocModel
-//
-//	err = c.FindOne(context.Background(), bson.M{"doc_id": "test:0"}).Decode(&o)
-//	if err != nil {
-//		panic(err)
-//	}
-//
-//	for i, model := range o.Msg {
-//		fmt.Println(i, model == nil)
-//	}
-//
-//}

pkg/common/db/s3/cont/controller.go

@@ -175,7 +175,6 @@ func (c *Controller) CompleteUpload(ctx context.Context, uploadID string, partHa
 		return nil, err
 	}
 	if md5Sum := md5.Sum([]byte(strings.Join(partHashs, partSeparator))); hex.EncodeToString(md5Sum[:]) != upload.Hash {
-		fmt.Println("CompleteUpload sum:", hex.EncodeToString(md5Sum[:]), "upload hash:", upload.Hash)
 		return nil, errors.New("md5 mismatching")
 	}
 	if info, err := c.StatObject(ctx, c.HashPath(upload.Hash)); err == nil {

pkg/common/ginprometheus/ginprometheus.go

@@ -3,7 +3,7 @@ package ginprometheus
 import (
 	"bytes"
 	"fmt"
-	"io/ioutil"
+	"io"
 	"net/http"
 	"os"
 	"strconv"
@@ -17,40 +17,42 @@ import (
 var defaultMetricPath = "/metrics"
 
 // counter, counter_vec, gauge, gauge_vec,
-// histogram, histogram_vec, summary, summary_vec
+// histogram, histogram_vec, summary, summary_vec.
-var reqCnt = &Metric{
+var (
-	ID:          "reqCnt",
+	reqCounter = &Metric{
-	Name:        "requests_total",
+		ID:          "reqCnt",
-	Description: "How many HTTP requests processed, partitioned by status code and HTTP method.",
+		Name:        "requests_total",
-	Type:        "counter_vec",
+		Description: "How many HTTP requests processed, partitioned by status code and HTTP method.",
-	Args:        []string{"code", "method", "handler", "host", "url"}}
+		Type:        "counter_vec",
+		Args:        []string{"code", "method", "handler", "host", "url"}}
 
-var reqDur = &Metric{
+	reqDuration = &Metric{
-	ID:          "reqDur",
+		ID:          "reqDur",
-	Name:        "request_duration_seconds",
+		Name:        "request_duration_seconds",
-	Description: "The HTTP request latencies in seconds.",
+		Description: "The HTTP request latencies in seconds.",
-	Type:        "histogram_vec",
+		Type:        "histogram_vec",
-	Args:        []string{"code", "method", "url"},
+		Args:        []string{"code", "method", "url"},
-}
+	}
 
-var resSz = &Metric{
+	resSize = &Metric{
-	ID:          "resSz",
+		ID:          "resSz",
-	Name:        "response_size_bytes",
+		Name:        "response_size_bytes",
-	Description: "The HTTP response sizes in bytes.",
+		Description: "The HTTP response sizes in bytes.",
-	Type:        "summary"}
+		Type:        "summary"}
 
-var reqSz = &Metric{
+	reqSize = &Metric{
-	ID:          "reqSz",
+		ID:          "reqSz",
-	Name:        "request_size_bytes",
+		Name:        "request_size_bytes",
-	Description: "The HTTP request sizes in bytes.",
+		Description: "The HTTP request sizes in bytes.",
-	Type:        "summary"}
+		Type:        "summary"}
 
-var standardMetrics = []*Metric{
+	standardMetrics = []*Metric{
-	reqCnt,
+		reqCounter,
-	reqDur,
+		reqDuration,
-	resSz,
+		resSize,
-	reqSz,
+		reqSize,
-}
+	}
+)
 
 /*
 RequestCounterURLLabelMappingFn is a function which can be supplied to the middleware to control
@@ -74,7 +76,7 @@ which would map "/customer/alice" and "/customer/bob" to their template "/custom
 type RequestCounterURLLabelMappingFn func(c *gin.Context) string
 
 // Metric is a definition for the name, description, type, ID, and
-// prometheus.Collector type (i.e. CounterVec, Summary, etc) of each metric
+// prometheus.Collector type (i.e. CounterVec, Summary, etc) of each metric.
 type Metric struct {
 	MetricCollector prometheus.Collector
 	ID              string
@@ -84,7 +86,7 @@ type Metric struct {
 	Args            []string
 }
 
-// Prometheus contains the metrics gathered by the instance and its path
+// Prometheus contains the metrics gathered by the instance and its path.
 type Prometheus struct {
 	reqCnt        *prometheus.CounterVec
 	reqDur        *prometheus.HistogramVec
@@ -102,7 +104,7 @@ type Prometheus struct {
 	URLLabelFromContext string
 }
 
-// PrometheusPushGateway contains the configuration for pushing to a Prometheus pushgateway (optional)
+// PrometheusPushGateway contains the configuration for pushing to a Prometheus pushgateway (optional).
 type PrometheusPushGateway struct {
 
 	// Push interval in seconds
@@ -112,7 +114,7 @@ type PrometheusPushGateway struct {
 	// where JOBNAME can be any string of your choice
 	PushGatewayURL string
 
-	// Local metrics URL where metrics are fetched from, this could be ommited in the future
+	// Local metrics URL where metrics are fetched from, this could be omitted in the future
 	// if implemented using prometheus common/expfmt instead
 	MetricsURL string
 
@@ -120,9 +122,11 @@ type PrometheusPushGateway struct {
 	Job string
 }
 
-// NewPrometheus generates a new set of metrics with a certain subsystem name
+// NewPrometheus generates a new set of metrics with a certain subsystem name.
 func NewPrometheus(subsystem string, customMetricsList ...[]*Metric) *Prometheus {
-	subsystem = "app"
+	if subsystem == "" {
+		subsystem = "app"
+	}
 
 	var metricsList []*Metric
 
@@ -131,16 +135,13 @@ func NewPrometheus(subsystem string, customMetricsList ...[]*Metric) *Prometheus
 	} else if len(customMetricsList) == 1 {
 		metricsList = customMetricsList[0]
 	}
-
+	metricsList = append(metricsList, standardMetrics...)
-	for _, metric := range standardMetrics {
-		metricsList = append(metricsList, metric)
-	}
 
 	p := &Prometheus{
 		MetricsList: metricsList,
 		MetricsPath: defaultMetricPath,
 		ReqCntURLLabelMappingFn: func(c *gin.Context) string {
-			return c.Request.URL.Path
+			return c.FullPath() // e.g. /user/:id , /user/:id/info
 		},
 	}
 
@@ -150,7 +151,7 @@ func NewPrometheus(subsystem string, customMetricsList ...[]*Metric) *Prometheus
 }
 
 // SetPushGateway sends metrics to a remote pushgateway exposed on pushGatewayURL
-// every pushIntervalSeconds. Metrics are fetched from metricsURL
+// every pushIntervalSeconds. Metrics are fetched from metricsURL.
 func (p *Prometheus) SetPushGateway(pushGatewayURL, metricsURL string, pushIntervalSeconds time.Duration) {
 	p.Ppg.PushGatewayURL = pushGatewayURL
 	p.Ppg.MetricsURL = metricsURL
@@ -158,13 +159,13 @@ func (p *Prometheus) SetPushGateway(pushGatewayURL, metricsURL string, pushInter
 	p.startPushTicker()
 }
 
-// SetPushGatewayJob job name, defaults to "gin"
+// SetPushGatewayJob job name, defaults to "gin".
 func (p *Prometheus) SetPushGatewayJob(j string) {
 	p.Ppg.Job = j
 }
 
 // SetListenAddress for exposing metrics on address. If not set, it will be exposed at the
-// same address of the gin engine that is being used
+// same address of the gin engine that is being used.
 func (p *Prometheus) SetListenAddress(address string) {
 	p.listenAddress = address
 	if p.listenAddress != "" {
@@ -181,7 +182,7 @@ func (p *Prometheus) SetListenAddressWithRouter(listenAddress string, r *gin.Eng
 	}
 }
 
-// SetMetricsPath set metrics paths
+// SetMetricsPath set metrics paths.
 func (p *Prometheus) SetMetricsPath(e *gin.Engine) {
 
 	if p.listenAddress != "" {
@@ -192,7 +193,7 @@ func (p *Prometheus) SetMetricsPath(e *gin.Engine) {
 	}
 }
 
-// SetMetricsPathWithAuth set metrics paths with authentication
+// SetMetricsPathWithAuth set metrics paths with authentication.
 func (p *Prometheus) SetMetricsPathWithAuth(e *gin.Engine, accounts gin.Accounts) {
 
 	if p.listenAddress != "" {
@@ -205,34 +206,43 @@ func (p *Prometheus) SetMetricsPathWithAuth(e *gin.Engine, accounts gin.Accounts
 }
 
 func (p *Prometheus) runServer() {
-	if p.listenAddress != "" {
+	go p.router.Run(p.listenAddress)
-		go p.router.Run(p.listenAddress)
-	}
 }
 
 func (p *Prometheus) getMetrics() []byte {
-	response, _ := http.Get(p.Ppg.MetricsURL)
+	response, err := http.Get(p.Ppg.MetricsURL)
+	if err != nil {
+		return nil
+	}
 
 	defer response.Body.Close()
-	body, _ := ioutil.ReadAll(response.Body)
 
+	body, _ := io.ReadAll(response.Body)
 	return body
 }
 
+var hostname, _ = os.Hostname()
+
 func (p *Prometheus) getPushGatewayURL() string {
-	h, _ := os.Hostname()
 	if p.Ppg.Job == "" {
 		p.Ppg.Job = "gin"
 	}
-	return p.Ppg.PushGatewayURL + "/metrics/job/" + p.Ppg.Job + "/instance/" + h
+	return p.Ppg.PushGatewayURL + "/metrics/job/" + p.Ppg.Job + "/instance/" + hostname
 }
 
 func (p *Prometheus) sendMetricsToPushGateway(metrics []byte) {
 	req, err := http.NewRequest("POST", p.getPushGatewayURL(), bytes.NewBuffer(metrics))
+	if err != nil {
+		return
+	}
+
 	client := &http.Client{}
-	if _, err = client.Do(req); err != nil {
+	resp, err := client.Do(req)
+	if err != nil {
 		fmt.Println("Error sending to push gateway error:", err.Error())
 	}
+
+	resp.Body.Close()
 }
 
 func (p *Prometheus) startPushTicker() {
@@ -244,7 +254,7 @@ func (p *Prometheus) startPushTicker() {
 	}()
 }
 
-// NewMetric associates prometheus.Collector based on Metric.Type
+// NewMetric associates prometheus.Collector based on Metric.Type.
 func NewMetric(m *Metric, subsystem string) prometheus.Collector {
 	var metric prometheus.Collector
 	switch m.Type {
@@ -321,20 +331,20 @@ func NewMetric(m *Metric, subsystem string) prometheus.Collector {
 }
 
 func (p *Prometheus) registerMetrics(subsystem string) {
-
 	for _, metricDef := range p.MetricsList {
 		metric := NewMetric(metricDef, subsystem)
 		if err := prometheus.Register(metric); err != nil {
 			fmt.Println("could not be registered in Prometheus,metricDef.Name:", metricDef.Name, "   error:", err.Error())
 		}
+
 		switch metricDef {
-		case reqCnt:
+		case reqCounter:
 			p.reqCnt = metric.(*prometheus.CounterVec)
-		case reqDur:
+		case reqDuration:
 			p.reqDur = metric.(*prometheus.HistogramVec)
-		case resSz:
+		case resSize:
 			p.resSz = metric.(prometheus.Summary)
-		case reqSz:
+		case reqSize:
 			p.reqSz = metric.(prometheus.Summary)
 		}
 		metricDef.MetricCollector = metric
@@ -353,7 +363,7 @@ func (p *Prometheus) UseWithAuth(e *gin.Engine, accounts gin.Accounts) {
 	p.SetMetricsPathWithAuth(e, accounts)
 }
 
-// HandlerFunc defines handler function for middleware
+// HandlerFunc defines handler function for middleware.
 func (p *Prometheus) HandlerFunc() gin.HandlerFunc {
 	return func(c *gin.Context) {
 		if c.Request.URL.Path == p.MetricsPath {
@@ -393,7 +403,7 @@ func prometheusHandler() gin.HandlerFunc {
 }
 
 func computeApproximateRequestSize(r *http.Request) int {
-	s := 0
+	var s int
 	if r.URL != nil {
 		s = len(r.URL.Path)
 	}

pkg/common/kafka/producer.go

@@ -15,8 +15,10 @@
 package kafka
 
 import (
+	"bytes"
 	"context"
 	"errors"
+	"strings"
 	"time"
 
 	"github.com/OpenIMSDK/protocol/constant"
@@ -49,8 +51,23 @@ func NewKafkaProducer(addr []string, topic string) *Producer {
 	p.config = sarama.NewConfig()             // Instantiate a sarama Config
 	p.config.Producer.Return.Successes = true // Whether to enable the successes channel to be notified after the message is sent successfully
 	p.config.Producer.Return.Errors = true
-	p.config.Producer.RequiredAcks = sarama.WaitForAll        // Set producer Message Reply level 0 1 all
 	p.config.Producer.Partitioner = sarama.NewHashPartitioner // Set the hash-key automatic hash partition. When sending a message, you must specify the key value of the message. If there is no key, the partition will be selected randomly
+
+	var producerAck = sarama.WaitForAll // default: WaitForAll
+	switch strings.ToLower(config.Config.Kafka.ProducerAck) {
+	case "no_response":
+		producerAck = sarama.NoResponse
+	case "wait_for_local":
+		producerAck = sarama.WaitForLocal
+	case "wait_for_all":
+		producerAck = sarama.WaitForAll
+	}
+	p.config.Producer.RequiredAcks = producerAck
+
+	var compress = sarama.CompressionNone // default: no compress
+	_ = compress.UnmarshalText(bytes.ToLower([]byte(config.Config.Kafka.CompressType)))
+	p.config.Producer.Compression = compress
+
 	if config.Config.Kafka.Username != "" && config.Config.Kafka.Password != "" {
 		p.config.Net.SASL.Enable = true
 		p.config.Net.SASL.User = config.Config.Kafka.Username

pkg/common/prommetrics/prommetrics.go

@@ -2,10 +2,11 @@ package prommetrics
 
 import (
 	grpc_prometheus "github.com/grpc-ecosystem/go-grpc-prometheus"
-	config2 "github.com/openimsdk/open-im-server/v3/pkg/common/config"
-	"github.com/openimsdk/open-im-server/v3/pkg/common/ginprometheus"
 	"github.com/prometheus/client_golang/prometheus"
 	"github.com/prometheus/client_golang/prometheus/collectors"
+
+	config2 "github.com/openimsdk/open-im-server/v3/pkg/common/config"
+	"github.com/openimsdk/open-im-server/v3/pkg/common/ginprometheus"
 )
 
 func NewGrpcPromObj(cusMetrics []prometheus.Collector) (*prometheus.Registry, *grpc_prometheus.ServerMetrics, error) {

pkg/common/prommetrics/prommetrics_test.go

@@ -3,9 +3,10 @@ package prommetrics
 import (
 	"testing"
 
-	config2 "github.com/openimsdk/open-im-server/v3/pkg/common/config"
 	"github.com/prometheus/client_golang/prometheus"
 	"github.com/stretchr/testify/assert"
+
+	config2 "github.com/openimsdk/open-im-server/v3/pkg/common/config"
 )
 
 func TestNewGrpcPromObj(t *testing.T) {

pkg/common/startrpc/start.go

@@ -28,10 +28,11 @@ import (
 	"github.com/openimsdk/open-im-server/v3/pkg/common/prommetrics"
 
 	grpcprometheus "github.com/grpc-ecosystem/go-grpc-prometheus"
-	kdisc "github.com/openimsdk/open-im-server/v3/pkg/common/discoveryregister"
 	"google.golang.org/grpc"
 	"google.golang.org/grpc/credentials/insecure"
 
+	kdisc "github.com/openimsdk/open-im-server/v3/pkg/common/discoveryregister"
+
 	"github.com/OpenIMSDK/tools/discoveryregistry"
 	"github.com/OpenIMSDK/tools/mw"
 	"github.com/OpenIMSDK/tools/network"

pkg/msgprocessor/conversation.go

@@ -118,8 +118,9 @@ func GetNotificationConversationIDByConversationID(conversationID string) string
 	l := strings.Split(conversationID, "_")
 	if len(l) > 1 {
 		l[0] = "n"
-		return conversationID
+		return strings.Join(l, "_")
 	}
+
 	return ""
 }
 

scripts/README.md

@@ -39,7 +39,7 @@ scripts/
 ├── demo.sh                             # Demonstration or example script.
 ├── docker-check-service.sh             # Docker script to check services' status.
 ├── docker-start-all.sh                 # Docker script to start all containers/services.
-├── ensure_tag.sh                       # Ensure correct tags or labeling.
+├── ensure-tag.sh                       # Ensure correct tags or labeling.
 ├── env_check.sh                        # Environment verification and checking.
 ├── gen-swagger-docs.sh                 # Script to generate Swagger documentation.
 ├── genconfig.sh                        # Generate configuration files.

scripts/env_check.sh

@@ -1,76 +0,0 @@
-#!/usr/bin/env bash
-
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#Include shell font styles and some basic information
-SCRIPTS_ROOT=$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)
-OPENIM_ROOT=$(dirname "${SCRIPTS_ROOT}")/..
-
-#Include shell font styles and some basic information
-source $SCRIPTS_ROOT/path_info.sh
-source $SCRIPTS_ROOT/lib/init.sh
-
-cd $SCRIPTS_ROOT
-
-echo -e "check time synchronize.................................."
-t=`curl http://time.akamai.com/?iso -s`
-t1=`date -d $t +%s`
-t2=`date +%s`
-let between=t2-t1
-if [[ $between -gt 10 ]] || [[ $between -lt -10 ]]; then
-  echo -e ${RED_PREFIX}"Warning: The difference between the iso time and the server's time is too large: "$between"s" ${COLOR_SUFFIX}
-else
-   echo -e ${GREEN_PREFIX} "ok: Server time is synchronized " ${COLOR_SUFFIX}
-fi
-
-
-echo -e "check login user........................................"
-user=`whoami`
-if [ $user == "root" ] ; then
-  echo -e ${GREEN_PREFIX} "ok: login user is root" ${COLOR_SUFFIX}
-else
-  echo -e ${RED_PREFIX}"Warning: The current user is not root "${COLOR_SUFFIX}
-fi
-
-echo -e "check docker............................................"
-docker_running=`systemctl status docker | grep running |  grep active | wc -l`
-
-docker_version=`docker-compose -v; docker -v`
-
-if [ $docker_running -gt 0 ]; then
-	echo -e ${GREEN_PREFIX} "ok: docker is running"   ${COLOR_SUFFIX}
-	echo -e ${GREEN_PREFIX}  $docker_version ${COLOR_SUFFIX}
-
-else
-	echo -e ${RED_PREFIX}"docker not running"${COLOR_SUFFIX}
-fi
-
-
-echo -e "check environment......................................."
-SYSTEM=`uname -s`
-if [ $SYSTEM != "Linux" ] ; then
-        echo -e ${RED_PREFIX}"Warning: Currently only Linux is supported"${COLOR_SUFFIX}
-else
-        echo -e ${GREEN_PREFIX} "ok: system is linux"${COLOR_SUFFIX}
-fi
-
-echo -e "check memory............................................"
-available=`free -m | grep Mem | awk '{print $NF}'`
-if [ $available -lt 2000 ] ; then
-        echo -e ${RED_PREFIX}"Warning: Your memory not enough, available is: " "$available"m${COLOR_SUFFIX}"\c"
-        echo -e ${RED_PREFIX}", must be greater than 2000m"${COLOR_SUFFIX}
-else
-        echo -e ${GREEN_PREFIX} "ok: available memory is: "$available"m${COLOR_SUFFIX}"
-fi

scripts/genconfig.sh

@@ -13,8 +13,8 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-# 本脚本功能：根据 scripts/environment.sh 配置，生成 OPENIM 组件 YAML 配置文件。
+# Function of this script: Generate the OPENIM component YAML configuration file according to the scripts/environment.sh configuration.
-# 示例：./scripts/genconfig.sh scripts/install/environment.sh scripts/template/config.yaml
+# eg：./scripts/genconfig.sh scripts/install/environment.sh scripts/template/config.yaml
 # Read: https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/init-config.md
 
 env_file="$1"
@@ -29,8 +29,17 @@ if [ $# -ne 2 ];then
     exit 1
 fi
 
-# Check if the required commands exist
 openim::util::require-dig
+result=$?
+if [ $result -ne 0 ]; then
+    openim::log::info "Please install 'dig' to use this feature."
+    openim::log::info "Installation instructions:"
+    openim::log::info "  For Ubuntu/Debian: sudo apt-get install dnsutils"
+    openim::log::info "  For CentOS/RedHat: sudo yum install bind-utils"
+    openim::log::info "  For macOS: 'dig' should be preinstalled. If missing, try: brew install bind"
+    openim::log::info "  For Windows: Install BIND9 tools from https://www.isc.org/download/"
+    openim::log::error_exit "Error: 'dig' command is required but not installed."
+fi
 
 source "${env_file}"
 

scripts/init-config.sh

@@ -31,6 +31,8 @@ readonly ENV_FILE=${ENV_FILE:-"${OPENIM_ROOT}/scripts/install/environment.sh"}
 declare -A TEMPLATES=(
   ["${OPENIM_ROOT}/deployments/templates/env_template.yaml"]="${OPENIM_ROOT}/.env"
   ["${OPENIM_ROOT}/deployments/templates/openim.yaml"]="${OPENIM_ROOT}/config/config.yaml"
+  ["${OPENIM_ROOT}/deployments/templates/prometheus.yml"]="${OPENIM_ROOT}/config/prometheus.yml"
+  ["${OPENIM_ROOT}/deployments/templates/alertmanager.yml"]="${OPENIM_ROOT}/config/alertmanager.yml"
 )
 
 for template in "${!TEMPLATES[@]}"; do
@@ -45,6 +47,7 @@ for template in "${!TEMPLATES[@]}"; do
       openim::log::error "Error processing template file ${template}"
       exit 1
     }
+    sleep 0.5
   done
 done
 

scripts/install/environment.sh

@@ -116,7 +116,12 @@ LAST_OCTET=$((LAST_OCTET + 1))
 PROMETHEUS_NETWORK_ADDRESS=$(generate_ip)
 LAST_OCTET=$((LAST_OCTET + 1))
 GRAFANA_NETWORK_ADDRESS=$(generate_ip)
-
+LAST_OCTET=$((LAST_OCTET + 1))
+NODE_EXPORTER_NETWORK_ADDRESS=$(generate_ip)
+LAST_OCTET=$((LAST_OCTET + 1))
+OPENIM_ADMIN_FRONT_NETWORK_ADDRESS=$(generate_ip)
+LAST_OCTET=$((LAST_OCTET + 1))
+ALERT_MANAGER_NETWORK_ADDRESS=$(generate_ip)
 ###################### openim 配置 ######################
 # read: https://github.com/openimsdk/open-im-server/blob/main/deployment/README.md
 def "OPENIM_DATA_DIR" "/data/openim"
@@ -242,6 +247,9 @@ def "OPENIM_WEB_PORT" "11001"                       # openim-web的端口
 def "OPENIM_WEB_ADDRESS" "${DOCKER_BRIDGE_GATEWAY}" # openim-web的地址
 def "OPENIM_WEB_DIST_PATH" "/app/dist"              # openim-web的dist路径
 
+###################### openim-admin-front 配置信息 ######################
+def "OPENIM_ADMIN_FRONT_PORT" "11002"                       # openim-admin-front的端口
+
 ###################### RPC 配置信息 ######################
 def "RPC_REGISTER_IP"                               # RPC的注册IP
 def "RPC_LISTEN_IP" "0.0.0.0"                       # RPC的监听IP
@@ -250,8 +258,38 @@ def "RPC_LISTEN_IP" "0.0.0.0"                       # RPC的监听IP
 def "PROMETHEUS_PORT" "19090"                       # Prometheus的端口
 def "PROMETHEUS_ADDRESS" "${DOCKER_BRIDGE_GATEWAY}" # Prometheus的地址
 
+###################### node-exporter 配置 ######################
+def "NODE_EXPORTER_PORT" "19100"                       # node-exporter的端口
+def "NODE_EXPORTER_ADDRESS" "${DOCKER_BRIDGE_GATEWAY}" # node-exporter的地址
+
+###################### alertmanagerS 配置 ######################
+def "ALERT_MANAGER_PORT" "19093"                       # node-exporter的端口
+def "ALERT_MANAGER_ADDRESS" "${DOCKER_BRIDGE_GATEWAY}" # node-exporter的地址
+
+###################### AlertManager Configuration Script ######################
+# 解析超时
+readonly ALERTMANAGER_RESOLVE_TIMEOUT=${ALERTMANAGER_RESOLVE_TIMEOUT:-'5m'}
+# 发件人邮箱
+readonly ALERTMANAGER_SMTP_FROM=${ALERTMANAGER_SMTP_FROM:-'alert@openim.io'}
+# SMTP服务器地址和端口
+readonly ALERTMANAGER_SMTP_SMARTHOST=${ALERTMANAGER_SMTP_SMARTHOST:-'smtp.163.com:465'}
+# SMTP认证用户名
+readonly ALERTMANAGER_SMTP_AUTH_USERNAME=${SMTP_USERNAME:-"alert@openim.io"}
+# SMTP认证密码
+readonly ALERTMANAGER_SMTP_AUTH_PASSWORD=${SMTP_PASSWORD:-"YOURAUTHPASSWORD"}
+# SMTP是否需要TLS
+readonly ALERTMANAGER_SMTP_REQUIRE_TLS=${ALERTMANAGER_SMTP_REQUIRE_TLS:-"false"}
+# SMTP HELO/EHLO标识符
+readonly ALERTMANAGER_SMTP_HELLO=${ALERTMANAGER_SMTP_HELLO:-"xxx监控告警"}
+# 邮箱接收人
+readonly ALERTMANAGER_EMAIL_TO=${ALERTMANAGER_EMAIL_TO:-"alert@example.com"}
+# 邮箱主题
+readonly ALERTMANAGER_EMAIL_SUBJECT=${ALERTMANAGER_EMAIL_SUBJECT:-"{EMAIL_SUBJECT:-'[Alert] Notification'}"}
+# 是否发送已解决的告警
+readonly ALERTMANAGER_SEND_RESOLVED=${ALERTMANAGER_SEND_RESOLVED:-"{SEND_RESOLVED:-'true'}"}
+
 ###################### Grafana 配置信息 ######################
-def "GRAFANA_PORT" "3000"                        # Grafana的端口
+def "GRAFANA_PORT" "13000"                        # Grafana的端口
 def "GRAFANA_ADDRESS" "${DOCKER_BRIDGE_GATEWAY}" # Grafana的地址
 
 ###################### RPC Port Configuration Variables ######################
@@ -340,8 +378,9 @@ def "IOS_BADGE_COUNT" "true"    # IOS徽章计数
 def "IOS_PRODUCTION" "false"    # IOS生产
 
 ###################### Prometheus 配置信息 ######################
-def "PROMETHEUS_ENABLE" "false" # 是否启用 Prometheus
+# 是否启用 Prometheus
-def "PROMETHEUS_URL" "/prometheus"
+readonly PROMETHEUS_ENABLE=${PROMETHEUS_ENABLE:-'false'}
+def "PROMETHEUS_URL" "${GRAFANA_ADDRESS}:${GRAFANA_PORT}"
 # Api 服务的 Prometheus 端口
 readonly API_PROM_PORT=${API_PROM_PORT:-'20100'}
 # User 服务的 Prometheus 端口
@@ -367,6 +406,7 @@ readonly THIRD_PROM_PORT=${THIRD_PROM_PORT:-'21301'}
 
 # Message Transfer 服务的 Prometheus 端口列表
 readonly MSG_TRANSFER_PROM_PORT=${MSG_TRANSFER_PROM_PORT:-'21400, 21401, 21402, 21403'}
+readonly MSG_TRANSFER_PROM_ADDRESS_PORT=${MSG_TRANSFER_PROM_ADDRESS_PORT:-"${DOCKER_BRIDGE_GATEWAY}:21400, ${DOCKER_BRIDGE_GATEWAY}:21401, ${DOCKER_BRIDGE_GATEWAY}:21402, ${DOCKER_BRIDGE_GATEWAY}:21403"}
 
 ###################### OpenIM openim-api ######################
 def "OPENIM_API_HOST" "127.0.0.1"

scripts/install/install-protobuf.sh

@@ -22,6 +22,8 @@
 # It can be downloaded from the following link:
 # https://github.com/OpenIMSDK/Open-IM-Protoc/releases/tag/v1.0.0
 # 
+# About the tool:
+# https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/protoc-tools.md
 # Download link (Windows): https://github.com/OpenIMSDK/Open-IM-Protoc/releases/download/v1.0.0/windows.zip
 # Download link (Linux): https://github.com/OpenIMSDK/Open-IM-Protoc/releases/download/v1.0.0/linux.zip
 # 

scripts/install/install.sh

@@ -76,8 +76,8 @@ function openim::install::install_openim() {
     openim::log::info "check openim dependency"
     openim::common::sudo "cp -r ${OPENIM_ROOT}/config/* ${OPENIM_CONFIG_DIR}/"
 
-    echo ${LINUX_PASSWORD} | sudo -S bash -c \
+    ${OPENIM_ROOT}/scripts/genconfig.sh ${ENV_FILE} ${OPENIM_ROOT}/deployments/templates/openim.yaml > ${OPENIM_CONFIG_DIR}/config.yaml
-        "${OPENIM_ROOT}/scripts/genconfig.sh ${ENV_FILE} deployments/templates/openim.yaml > ${OPENIM_CONFIG_DIR}/config.yaml"
+    ${OPENIM_ROOT}/scripts/genconfig.sh ${ENV_FILE} ${OPENIM_ROOT}/deployments/templates/prometheus.yml > ${OPENIM_CONFIG_DIR}/prometheus.yml
 
     openim::util::check_ports ${OPENIM_DEPENDENCY_PORT_LISTARIES[@]}
 

scripts/install/openim-msggateway.sh

@@ -123,6 +123,7 @@ function openim::msggateway::status() {
   # Check the running status of the ${SERVER_NAME}. If active (running) is displayed, the ${SERVER_NAME} is started successfully.
   systemctl status ${SERVER_NAME}|grep -q 'active' || {
     openim::log::error "${SERVER_NAME} failed to start, maybe not installed properly"
+    
     return 1
   }
 

scripts/install/test.sh

@@ -38,9 +38,8 @@ IAM_ROOT=$(dirname "${BASH_SOURCE[0]}")/../..
 [[ -z ${COMMON_SOURCED} ]] && source ${IAM_ROOT}/scripts/install/common.sh
 
 # API Server API Address:Port
-INSECURE_OPENIMAPI=${IAM_APISERVER_HOST}:${API_OPENIM_PORT}
+INSECURE_OPENIMAPI="http://${OPENIM_API_HOST}:${API_OPENIM_PORT}"
 INSECURE_OPENIMAUTO=${OPENIM_RPC_AUTH_HOST}:${OPENIM_AUTH_PORT}
-
 CCURL="curl -f -s -XPOST" # Create
 UCURL="curl -f -s -XPUT" # Update
 RCURL="curl -f -s -XGET" # Retrieve
@@ -73,7 +72,7 @@ function openim::test::auth() {
 
 # Define a function to get a token (Admin Token)
 openim::test::get_token() {
-  token_response=$(${CCURL} "${OperationID}" "${Header}" http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/auth/user_token \
+  token_response=$(${CCURL} "${OperationID}" "${Header}" ${INSECURE_OPENIMAPI}/auth/user_token \
       -d'{"secret": "'"$SECRET"'","platformID": 1,"userID": "openIM123456"}')
   token=$(echo $token_response | grep -Po 'token[" :]+\K[^"]+')
   echo "$token"
@@ -94,7 +93,7 @@ EOF
   )
   echo "Requesting force logout for user: $request_body"
 
-  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/auth/force_logout" -d "${request_body}")
+  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/auth/force_logout" -d "${request_body}")
 
   openim::test::check_error "$response"
 }
@@ -127,7 +126,7 @@ EOF
   echo "Request body for user registration: $request_body"
 
   # Send the registration request
-  local user_register_response=$(${CCURL} "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/user/user_register" -d "${request_body}")
+  local user_register_response=$(${CCURL} "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/user/user_register" -d "${request_body}")
 
   # Check for errors in the response
   openim::test::check_error "$user_register_response"
@@ -148,7 +147,7 @@ EOF
 )
   echo "$request_body"
 
-  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/user/account_check" -d "${request_body}")
+  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/user/account_check" -d "${request_body}")
 
   openim::test::check_error "$response"
 }
@@ -166,7 +165,7 @@ EOF
 )
   echo "$request_body"
 
-  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/user/get_users" -d "${request_body}")
+  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/user/get_users" -d "${request_body}")
 
   openim::test::check_error "$response"
 }
@@ -184,7 +183,7 @@ EOF
 )
   echo "$request_body"
 
-  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/user/get_users_info" -d "${request_body}")
+  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/user/get_users_info" -d "${request_body}")
 
   openim::test::check_error "$response"
 }
@@ -204,7 +203,7 @@ EOF
 )
   echo "$request_body"
 
-  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/user/get_users_online_status" -d "${request_body}")
+  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/user/get_users_online_status" -d "${request_body}")
 
   openim::test::check_error "$response"
 }
@@ -223,7 +222,7 @@ EOF
 )
   echo "$request_body"
 
-  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/user/update_user_info" -d "${request_body}")
+  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/user/update_user_info" -d "${request_body}")
 
   openim::test::check_error "$response"
 }
@@ -238,7 +237,7 @@ EOF
 )
   echo "$request_body"
 
-  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/user/get_subscribe_users_status" -d "${request_body}")
+  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/user/get_subscribe_users_status" -d "${request_body}")
 
   openim::test::check_error "$response"
 }
@@ -259,7 +258,7 @@ EOF
 )
   echo "$request_body"
 
-  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/user/subscribe_users_status" -d "${request_body}")
+  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/user/subscribe_users_status" -d "${request_body}")
 
   openim::test::check_error "$response"
 }
@@ -275,7 +274,7 @@ EOF
 )
   echo "$request_body"
 
-  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/user/set_global_msg_recv_opt" -d "${request_body}")
+  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/user/set_global_msg_recv_opt" -d "${request_body}")
 
   openim::test::check_error "$response"
 }
@@ -330,7 +329,7 @@ EOF
 )
   echo "$request_body"
 
-  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/friend/is_friend" -d "${request_body}")
+  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/friend/is_friend" -d "${request_body}")
 
   openim::test::check_error "$response"
 }
@@ -346,7 +345,7 @@ EOF
 )
   echo "$request_body"
 
-  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/friend/delete_friend" -d "${request_body}")
+  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/friend/delete_friend" -d "${request_body}")
 
   openim::test::check_error "$response"
 }
@@ -365,7 +364,7 @@ EOF
 )
   echo "$request_body"
 
-  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/friend/get_friend_apply_list" -d "${request_body}")
+  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/friend/get_friend_apply_list" -d "${request_body}")
 
   openim::test::check_error "$response"
 }
@@ -384,7 +383,7 @@ EOF
 )
   echo "$request_body"
 
-  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/friend/get_friend_list" -d "${request_body}")
+  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/friend/get_friend_list" -d "${request_body}")
 
   openim::test::check_error "$response"
 }
@@ -401,7 +400,7 @@ EOF
 )
   echo "$request_body"
 
-  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/friend/set_friend_remark" -d "${request_body}")
+  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/friend/set_friend_remark" -d "${request_body}")
 
   openim::test::check_error "$response"
 }
@@ -419,7 +418,7 @@ EOF
 )
   echo "$request_body"
 
-  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/friend/add_friend" -d "${request_body}")
+  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/friend/add_friend" -d "${request_body}")
 
   openim::test::check_error "$response"
 }
@@ -437,7 +436,7 @@ EOF
 )
   echo "$request_body"
 
-  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/friend/import_friend" -d "${request_body}")
+  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/friend/import_friend" -d "${request_body}")
 
   openim::test::check_error "$response"
 }
@@ -456,7 +455,7 @@ EOF
 )
   echo "$request_body"
 
-  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/friend/add_friend_response" -d "${request_body}")
+  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/friend/add_friend_response" -d "${request_body}")
 
   openim::test::check_error "$response"
 }
@@ -475,7 +474,7 @@ EOF
 )
   echo "$request_body"
 
-  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/friend/get_self_friend_apply_list" -d "${request_body}")
+  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/friend/get_self_friend_apply_list" -d "${request_body}")
 
   openim::test::check_error "$response"
 }
@@ -491,7 +490,7 @@ EOF
 )
   echo "$request_body"
 
-  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/friend/add_black" -d "${request_body}")
+  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/friend/add_black" -d "${request_body}")
 
   openim::test::check_error "$response"
 }
@@ -507,7 +506,7 @@ EOF
 )
   echo "$request_body"
 
-  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/friend/remove_black" -d "${request_body}")
+  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/friend/remove_black" -d "${request_body}")
 
   openim::test::check_error "$response"
 }
@@ -526,7 +525,7 @@ EOF
 )
   echo "$request_body"
 
-  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/friend/get_black_list" -d "${request_body}")
+  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/friend/get_black_list" -d "${request_body}")
 
   openim::test::check_error "$response"
 }
@@ -619,7 +618,7 @@ EOF
 )
   echo "$request_body"
 
-  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/group/create_group" -d "${request_body}")
+  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/group/create_group" -d "${request_body}")
 
   openim::test::check_error "$response"
 }
@@ -639,7 +638,7 @@ EOF
 )
   echo "$request_body"
 
-  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/group/invite_user_to_group" -d "${request_body}")
+  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/group/invite_user_to_group" -d "${request_body}")
 
   openim::test::check_error "$response"
 }
@@ -656,7 +655,7 @@ EOF
 )
   echo "$request_body"
 
-  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/group/transfer_group" -d "${request_body}")
+  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/group/transfer_group" -d "${request_body}")
 
   openim::test::check_error "$response"
 }
@@ -671,7 +670,7 @@ EOF
 )
   echo "$request_body"
 
-  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/group/get_groups_info" -d "${request_body}")
+  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/group/get_groups_info" -d "${request_body}")
 
   openim::test::check_error "$response"
 }
@@ -690,7 +689,7 @@ EOF
 )
   echo "$request_body"
 
-  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/group/kick_group" -d "${request_body}")
+  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/group/kick_group" -d "${request_body}")
 
   openim::test::check_error "$response"
 }
@@ -706,7 +705,7 @@ EOF
 )
   echo "$request_body"
 
-  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/group/get_group_members_info" -d "${request_body}")
+  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/group/get_group_members_info" -d "${request_body}")
 
   openim::test::check_error "$response"
 }
@@ -725,7 +724,7 @@ EOF
 )
   echo "$request_body"
 
-  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/group/get_group_member_list" -d "${request_body}")
+  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/group/get_group_member_list" -d "${request_body}")
 
   openim::test::check_error "$response"
 }
@@ -744,7 +743,7 @@ EOF
 )
   echo "$request_body"
 
-  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/group/get_joined_group_list" -d "${request_body}")
+  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/group/get_joined_group_list" -d "${request_body}")
 
   openim::test::check_error "$response"
 }
@@ -769,7 +768,7 @@ EOF
 )
   echo "$request_body"
 
-  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/group/set_group_member_info" -d "${request_body}")
+  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/group/set_group_member_info" -d "${request_body}")
 
   openim::test::check_error "$response"
 }
@@ -784,7 +783,7 @@ EOF
 )
   echo "$request_body"
 
-  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/group/mute_group" -d "${request_body}")
+  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/group/mute_group" -d "${request_body}")
 
   openim::test::check_error "$response"
 }
@@ -799,7 +798,7 @@ EOF
 )
   echo "$request_body"
 
-  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/group/cancel_mute_group" -d "${request_body}")
+  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/group/cancel_mute_group" -d "${request_body}")
 
   openim::test::check_error "$response"
 }
@@ -814,7 +813,7 @@ EOF
 )
   echo "$request_body"
 
-  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/group/dismiss_group" -d "${request_body}")
+  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/group/dismiss_group" -d "${request_body}")
 
   openim::test::check_error "$response"
 }
@@ -830,7 +829,7 @@ EOF
 )
   echo "$request_body"
 
-  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/group/cancel_mute_group_member" -d "${request_body}")
+  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/group/cancel_mute_group_member" -d "${request_body}")
 
   openim::test::check_error "$response"
 }
@@ -848,7 +847,7 @@ EOF
 )
   echo "$request_body"
 
-  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/group/join_group" -d "${request_body}")
+  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/group/join_group" -d "${request_body}")
 
   openim::test::check_error "$response"
 }
@@ -873,7 +872,7 @@ EOF
 )
   echo "$request_body"
 
-  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/group/set_group_info" -d "${request_body}")
+  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/group/set_group_info" -d "${request_body}")
 
   openim::test::check_error "$response"
 }
@@ -890,7 +889,7 @@ EOF
 )
   echo "$request_body"
 
-  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/group/quit_group" -d "${request_body}")
+  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/group/quit_group" -d "${request_body}")
 
   openim::test::check_error "$response"
 }
@@ -909,7 +908,7 @@ EOF
 )
   echo "$request_body"
 
-  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/group/get_recv_group_applicationList" -d "${request_body}")
+  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/group/get_recv_group_applicationList" -d "${request_body}")
 
   openim::test::check_error "$response"
 }
@@ -927,7 +926,7 @@ EOF
 )
   echo "$request_body"
 
-  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/group/group_application_response" -d "${request_body}")
+  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/group/group_application_response" -d "${request_body}")
 
   openim::test::check_error "$response"
 }
@@ -946,7 +945,7 @@ EOF
 )
   echo "$request_body"
 
-  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/group/get_user_req_group_applicationList" -d "${request_body}")
+  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/group/get_user_req_group_applicationList" -d "${request_body}")
 
   openim::test::check_error "$response"
 }
@@ -963,7 +962,7 @@ EOF
 )
   echo "$request_body"
 
-  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/group/mute_group_member" -d "${request_body}")
+  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/group/mute_group_member" -d "${request_body}")
 
   openim::test::check_error "$response"
 }
@@ -981,7 +980,7 @@ EOF
 )
   echo "$request_body"
 
-  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/group/get_group_users_req_application_list" -d "${request_body}")
+  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/group/get_group_users_req_application_list" -d "${request_body}")
 
   openim::test::check_error "$response"
 }
@@ -1078,7 +1077,7 @@ function openim::test::group() {
 
 # Define a function to register a user
 openim::register_user() {
-  user_register_response=$(${CCURL} "${Header}" http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/user/user_register \
+  user_register_response=$(${CCURL} "${Header}" ${INSECURE_OPENIMAPI}/user/user_register \
     -d'{
       "secret": "openIM123",
       "users": [{"userID": "11111112","nickname": "yourNickname","faceURL": "yourFaceURL"}]
@@ -1090,7 +1089,7 @@ openim::register_user() {
 # Define a function to check the account
 openim::test::check_account() {
   local token=$1
-  account_check_response=$(${CCURL} "${Header}" -H"operationID: 1646445464564" -H"token: ${token}" http://localhost:${API_OPENIM_PORT}/user/account_check \
+  account_check_response=$(${CCURL} "${Header}" -H"operationID: 1646445464564" -H"token: ${token}" ${INSECURE_OPENIMAPI}/user/account_check \
         -d'{
           "checkUserIDs": ["11111111","11111112"]
         }')
@@ -1164,7 +1163,7 @@ EOF
 )
   echo "$request_body"
 
-  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/msg/send_msg" -d "${request_body}")
+  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/msg/send_msg" -d "${request_body}")
 
   openim::test::check_error "$response"
 }
@@ -1185,7 +1184,7 @@ EOF
 )
   echo "$request_body"
 
-  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/msg/revoke_msg" -d "${request_body}")
+  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/msg/revoke_msg" -d "${request_body}")
 
   openim::test::check_error "$response"
 }
@@ -1203,7 +1202,7 @@ EOF
 )
   echo "$request_body"
 
-  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "http://${OPENIM_API_HOST}:${API_OPENIM_PORT}/msg/user_clear_all_msg" -d "${request_body}")
+  local response=$(${CCURL} "${Token}" "${OperationID}" "${Header}" "${INSECURE_OPENIMAPI}/msg/user_clear_all_msg" -d "${request_body}")
 
   openim::test::check_error "$response"
 }

scripts/lib/util.sh

@@ -1121,8 +1121,7 @@ function openim::util::check-file-in-alphabetical-order {
 # Checks whether jq is installed.
 function openim::util::require-jq {
   if ! command -v jq &>/dev/null; then
-    echo "jq not found. Please install." 1>&2
+    openim::log::errexit "jq not found. Please install." 1>&2
-    return 1
   fi
 }
 
@@ -1130,15 +1129,10 @@ function openim::util::require-jq {
 # Checks whether dig is installed and provides installation instructions if it is not.
 function openim::util::require-dig {
   if ! command -v dig &>/dev/null; then
-    echo "dig command not found."
+    openim::log::error "dig command not found."
-    echo "Please install 'dig' to use this feature."
-    echo "Installation instructions:"
-    echo "  For Ubuntu/Debian: sudo apt-get install dnsutils"
-    echo "  For CentOS/RedHat: sudo yum install bind-utils"
-    echo "  For macOS: 'dig' should be preinstalled. If missing, try: brew install bind"
-    echo "  For Windows: Install BIND9 tools from https://www.isc.org/download/"
     return 1
   fi
+  return 0
 }
 
 # outputs md5 hash of $1, works on macOS and Linux

scripts/make-rules/release.mk

@@ -34,7 +34,7 @@ release.tag: tools.verify.gsemver release.ensure-tag
 ## release.ensure-tag: ensure tag
 .PHONY: release.ensure-tag
 release.ensure-tag: tools.verify.gsemver
-	@scripts/ensure_tag.sh
+	@scripts/ensure-tag.sh
 
 ## release.help: Display help information about the release package
 .PHONY: release.help

test/e2e/api/.keep

@@ -1 +0,0 @@
-.keep

test/e2e/api/user/curd.go

@@ -1,7 +1,10 @@
 package user
 
 import (
+	"fmt"
+
 	gettoken "github.com/openimsdk/open-im-server/v3/test/e2e/api/token"
+	"github.com/openimsdk/open-im-server/v3/test/e2e/framework/config"
 )
 
 // UserInfoRequest represents a request to get or update user information
@@ -17,14 +20,20 @@ type GetUsersOnlineStatusRequest struct {
 
 // GetUsersInfo retrieves detailed information for a list of user IDs
 func GetUsersInfo(token string, userIDs []string) error {
+
+	url := fmt.Sprintf("http://%s:%s/user/get_users_info", config.LoadConfig().APIHost, config.LoadConfig().APIPort)
+
 	requestBody := UserInfoRequest{
 		UserIDs: userIDs,
 	}
-	return sendPostRequestWithToken("http://your-api-host:port/user/get_users_info", token, requestBody)
+	return sendPostRequestWithToken(url, token, requestBody)
 }
 
 // UpdateUserInfo updates the information for a user
 func UpdateUserInfo(token, userID, nickname, faceURL string) error {
+
+	url := fmt.Sprintf("http://%s:%s/user/update_user_info", config.LoadConfig().APIHost, config.LoadConfig().APIPort)
+
 	requestBody := UserInfoRequest{
 		UserInfo: &gettoken.User{
 			UserID:   userID,
@@ -32,13 +41,17 @@ func UpdateUserInfo(token, userID, nickname, faceURL string) error {
 			FaceURL:  faceURL,
 		},
 	}
-	return sendPostRequestWithToken("http://your-api-host:port/user/update_user_info", token, requestBody)
+	return sendPostRequestWithToken(url, token, requestBody)
 }
 
 // GetUsersOnlineStatus retrieves the online status for a list of user IDs
 func GetUsersOnlineStatus(token string, userIDs []string) error {
+
+	url := fmt.Sprintf("http://%s:%s/user/get_users_online_status", config.LoadConfig().APIHost, config.LoadConfig().APIPort)
+
 	requestBody := GetUsersOnlineStatusRequest{
 		UserIDs: userIDs,
 	}
-	return sendPostRequestWithToken("http://your-api-host:port/user/get_users_online_status", token, requestBody)
+
-}
+	return sendPostRequestWithToken(url, token, requestBody)
+}

test/e2e/api/user/user.go

@@ -8,6 +8,7 @@ import (
 	"net/http"
 
 	gettoken "github.com/openimsdk/open-im-server/v3/test/e2e/api/token"
+	"github.com/openimsdk/open-im-server/v3/test/e2e/framework/config"
 )
 
 // ForceLogoutRequest represents a request to force a user logout
@@ -34,30 +35,39 @@ type Pagination struct {
 
 // ForceLogout forces a user to log out
 func ForceLogout(token, userID string, platformID int) error {
+
+	url := fmt.Sprintf("http://%s:%s/auth/force_logout", config.LoadConfig().APIHost, config.LoadConfig().APIPort)
+
 	requestBody := ForceLogoutRequest{
 		PlatformID: platformID,
 		UserID:     userID,
 	}
-	return sendPostRequestWithToken("http://your-api-host:port/auth/force_logout", token, requestBody)
+	return sendPostRequestWithToken(url, token, requestBody)
 }
 
 // CheckUserAccount checks if the user accounts exist
 func CheckUserAccount(token string, userIDs []string) error {
+
+	url := fmt.Sprintf("http://%s:%s/user/account_check", config.LoadConfig().APIHost, config.LoadConfig().APIPort)
+
 	requestBody := CheckUserAccountRequest{
 		CheckUserIDs: userIDs,
 	}
-	return sendPostRequestWithToken("http://your-api-host:port/user/account_check", token, requestBody)
+	return sendPostRequestWithToken(url, token, requestBody)
 }
 
 // GetUsers retrieves a list of users with pagination
 func GetUsers(token string, pageNumber, showNumber int) error {
+
+	url := fmt.Sprintf("http://%s:%s/user/account_check", config.LoadConfig().APIHost, config.LoadConfig().APIPort)
+
 	requestBody := GetUsersRequest{
 		Pagination: Pagination{
 			PageNumber: pageNumber,
 			ShowNumber: showNumber,
 		},
 	}
-	return sendPostRequestWithToken("http://your-api-host:port/user/get_users", token, requestBody)
+	return sendPostRequestWithToken(url, token, requestBody)
 }
 
 // sendPostRequestWithToken sends a POST request with a token in the header

test/e2e/e2e_test.go

@@ -20,4 +20,4 @@ func TestMain(m *testing.M) {
 
 func TestE2E(t *testing.T) {
 	RunE2ETests(t)
-}
+}

test/e2e/framework/config/.keep

@@ -1 +0,0 @@
-.keep

test/e2e/framework/config/config.go

@@ -1,6 +1,9 @@
 package config
 
-import "flag"
+import (
+	"flag"
+	"os"
+)
 
 // Flags is the flag set that AddOptions adds to. Test authors should
 // also use it instead of directly adding to the global command line.
@@ -19,3 +22,49 @@ func CopyFlags(source *flag.FlagSet, target *flag.FlagSet) {
 		target.Var(flag.Value, flag.Name, flag.Usage)
 	})
 }
+
+// Config defines the configuration structure for the OpenIM components.
+type Config struct {
+	APIHost             string
+	APIPort             string
+	MsgGatewayHost      string
+	MsgTransferHost     string
+	PushHost            string
+	RPCAuthHost         string
+	RPCConversationHost string
+	RPCFriendHost       string
+	RPCGroupHost        string
+	RPCMsgHost          string
+	RPCThirdHost        string
+	RPCUserHost         string
+	// Add other configuration fields as needed
+}
+
+// LoadConfig loads the configurations from environment variables or default values.
+func LoadConfig() *Config {
+	return &Config{
+		APIHost: getEnv("OPENIM_API_HOST", "127.0.0.1"),
+		APIPort: getEnv("API_OPENIM_PORT", "10002"),
+
+		// TODO: Set default variable
+		MsgGatewayHost:      getEnv("OPENIM_MSGGATEWAY_HOST", "default-msggateway-host"),
+		MsgTransferHost:     getEnv("OPENIM_MSGTRANSFER_HOST", "default-msgtransfer-host"),
+		PushHost:            getEnv("OPENIM_PUSH_HOST", "default-push-host"),
+		RPCAuthHost:         getEnv("OPENIM_RPC_AUTH_HOST", "default-rpc-auth-host"),
+		RPCConversationHost: getEnv("OPENIM_RPC_CONVERSATION_HOST", "default-rpc-conversation-host"),
+		RPCFriendHost:       getEnv("OPENIM_RPC_FRIEND_HOST", "default-rpc-friend-host"),
+		RPCGroupHost:        getEnv("OPENIM_RPC_GROUP_HOST", "default-rpc-group-host"),
+		RPCMsgHost:          getEnv("OPENIM_RPC_MSG_HOST", "default-rpc-msg-host"),
+		RPCThirdHost:        getEnv("OPENIM_RPC_THIRD_HOST", "default-rpc-third-host"),
+		RPCUserHost:         getEnv("OPENIM_RPC_USER_HOST", "default-rpc-user-host"),
+	}
+}
+
+// getEnv is a helper function to read an environment variable or return a default value.
+func getEnv(key, defaultValue string) string {
+	value, exists := os.LookupEnv(key)
+	if !exists {
+		return defaultValue
+	}
+	return value
+}